Reseñas de clientes para Martillo de demolición VEVOR de 3500 W, martillo rompedor de hormigón, 2 cinceles con guantes y mango frontal giratorio de 360 °C para zanjas, martillo eléctrico de alta resistencia de 1900 BPM, color negro

Balcon de 6’́’ à couper, abandonné après avoir fait 3 lignes. Commandé ponceuse pour cloisons sèches VEVOR, ponceuse électrique sans balais 800 W, vitesse variable 1 000-2 300 tr/min, qui a fait le travail a merveille malgré les rods d'aciers.

Zwar habe ich bislang nur einen Testlauf unternommen, dabei aber in sage und schreibe 10 Minuten drei Betonkegel von Zaunpfählen zerkleinert, die bei mir schon jahrelang herumstanden. Die nächste Anwendung wird ein ca. 8 m langer Estrichstreifen von ca. 12 cm Stärke sein, unter dem alte Abfluss-Tonrohre auf Ersetzung durch KG-Rohre warten, das Vorhaben macht mir keine Sorgen mehr. Und ich habe einen Meißel zugekauft, mit dem ich einen Erdungspfahl ins Erdreich versenken will...

Needed this to break up a bunch of concrete. It worked like a charm !

Works perfectly

Works like a top, used it and abused it and its still going, leaks a big to lube the shank for the bit but thats fine, keep the fluid topped up and shes good to go! it impressed me and my friends!

Thank you great products at good price great shipping

Works for what I needed it for. Busted up 4-5" concrete slabs little by little. Price point is great. Paid for itself versus paying for rental units. Noticed the oil leaks out onto the bit more than what I would have expected. So far so good.

This thing worked perfect for what I needed done it is a little on the heavy side but as long as you eat a bowl of Wheaties first you will be fine

Went through 6in reinforced concrete easy. Good purchase

I bought this when replacing an old fence with wooden posts in concrete. I decided to cut off the old posts and dig new post holes. I discovered my yard is full of rocks! The auger was almost useless. I dug 4 holes with a post hole digger and a rock bar. Way to much work for me. I bought the jackhammer hoping it would be less work than a rock bar. It did not dissapoint. Set up was easy and operation was simple. It's fairly heavy for it's size which is a plus for me. I used the pointed bit to break up rocks and dislodge them from the sides of the holes. I dug 6 holes 18 in deep and 9 holes 24 in deep for the new poles. Surprisingly, it was able to reach all the way to the bottom of the 24 in holes. It took 9 hours to dig the 9 holes at 24 in deep! This tool kept up all day! No problems at all. It would have cost me the same amount of money to rent one for one day from the local DIY store as it did to buy this one. I used it for 2 full days, so I came out ahead on $$. It is a sturdy, well made tool and held up well.