Reseñas de clientes para VEVOR Plataforma Elevadora para Motocicletas 41,5 x 35 cm Elevador de Motos Hidráulicos de Tijera Capacidad de 158 kg Mesa Elevadora con 2 Ruedas Elevación de 340-905 mm para Taller Garaje, Naranja

Works great - lifts our bikes with snowbike kit attached and then we prop up the track on regular bike stand. Eye level wrenching and easy to move around

Prijs kwaliteit helemaal top zeer gemakkelijk Hoogte ook zeer goed ideaal voor steps omhoog te zetten om eraan te werken zonder rugpijn Normaal voor moto's maar voor mijn gebruik iedeaal Steunt perfect en je kan eraan werken zonder veel problemen Prijs is niet duur voor wat je krijgt zeer goed verpakt bij levering en zeer makkelijk te installeren

It's strong, and compact so it doesn't take up much room. However, the hydraulic jack is positioned in way that makes it difficult to install the foot pedal. Once you get pass that the lift table is easy to use the casters are a great way to keep the table secured. On a negative note, after 1 day of use it is leaking oil (didn't let me attach a picture), I’m hoping this is just a mistake on our end, perhaps didn’t tighten something up. I will be contacting customer service to get this resolved as soon as possible as we hope to use this long term.

We use it for sanding Kiln sides, to keep from constant bending over and getting backaches. The higher you go the rockier it gets so we added some adjustable outriggers. But it preforms as it should, good product. I gave it 4 stars because of the flex as you go higher.

Lift is awesome but the caster wheels lock doesn't work and I have tried six different times to get them replaced and VEVOR just keeps giving the run around

The lift seems solid. Casters were a pain to install if you have medium sized fingers. Lowering handle that uses a wire /cotter pin is loose and not the same as shown in picture. Update: Vector has reached out and I have been waiting on a response the last few days. The Jack started leaking hydraulic fluid and the last message was do not use because of safety concerns. Are you going to replace or refund my money? Am I s.o.l? What’s going on? Update: Now they will only refund $42 see pictures. Final Update: I asked for a refund or new one and they said they would do either one. I asked for a new one and it took less than a week, no leaks

This thing doesn't fit under my 12" height 2027 Suzuki DR-Z4s. The marketing is very deceptive. They show and say it will life a motorcycle? How? The lowest this thing goes is 14". How many motorcycle have 14" of clearance under them? What a waste of $ and it's a pain in the butt to put together. I do not recommend. Deceptive advertising at best.

Qualité très médiocre, matériel assez faible, tout bouge dans tous les sens même en ayant serré tous les boulons, le cric est instable et la pédale ainsi que la molette pour le faire descendre sont mal mis et pas pratiques du tout. Je ne pense pas qu'il va durer dans le temps

What I liked was the promptness of delivery, the communication level of contact throughout the process. Packaging was also good. What I don’t like is the poor build quality and lack of attention to detail. When the article arrived, was unpacked and assembled, there were parts missing. No means of securing the release shaft to its screw. Then the foot pump either didn’t raise the platform or barely worked at all. The pump was losing pressure and wouldn’t raise the platform with normal operation.. Rather than return it to the mainland from Tasmania, I took a look at what might be causing the problem. Here is what I found.. The screw on the release valve seemed to work ok but the foot pump shaft itself seemed very loose in its mount. The problem was in the thread fitting guide nut which screwed into the base plate and through which the plunger passed was loose and had been jammed very tight, probably to compensate for the poor fitment at assembly time. Thread tape and reassembled and now it is working ok. But not great. This reflects poorly on the product and the company and proper quality control would have caught it early before becoming the customers problem. A customer should not have to carry the burden of poor workmanship upon receipt of the goods at any time. I’m scarred by this purchase and advise those considering a purchase of this model to be very suspicious of these things I mentioned above. I eventually got the jack I paid for but not without fixing its problems first.

Erster Eindruck: Rahmen krumm, Gewinde nicht ordentlich geschnitten .... absoluter Chinaschrott.