Reseñas de clientes para VEVOR Plataforma Elevadora para Motocicletas 41,5 x 35 cm Elevador de Motos Hidráulicos de Tijera Capacidad de 158 kg Mesa Elevadora con 2 Ruedas Elevación de 340-905 mm para Taller Garaje, Naranja

works well, i cut the pedal off to reduce width. very steady, easy to raise and lower.

Great stand for dirt bikes and other light weight motorcycles. Hold down knobs are heavy aluminum making them easier to use than other brands.

I’m using it as a lift for a round hot tub cover. I have a piece of PVC sheeting on top which the cover slides on. Overall works well

Super solid hold on the bike. Once u lift bike, slide safety pin in and then let jack descend so it bumps and pressures the pin. Thats when it fetches up rock solid. I like it a lot. Ken.. on the Hudson River (( tighten all the bolts b4 using. Easy to do.))

We screwed a wooden platform to it and it lifts the furniture we’re restoring easily with no problems or sags, even when left lifted for several days in a row

I bought this to remove and work on a 70's VW Beetle. It will be perfect for it. Allows me to turn and lift to perfect height. Has nicefeatures.

This lift i should of bought a long time ago. It makes working sitting down or standing up on motorcycles a dream. Fully extended you can roll dirtbike around spin it if you don't want to get off your chair. Strongly recommend it

Worked as intended. Perfect for adjusting the height of an appliance (double oven install) without needing another person. Only negative observation is storage of the safety pin. Need holes drilled through the top platform that allows the safety pin to be securely stored ON/WITH the unit at its lowest setting. Pin is blocked by scissor arms and can't be inserted when fully lowered. Could there be a hydraulic problem if stored in raised position to keep pin inserted? Or add 2 spring clips to the frame to secure the safety pin. Also noted that some bolt connections had 3 washers while other like bolt connections had 1, and a number of the bolt nuts were not even figer tight. Hmm, whose assembling this thing? But other than retightening all the bolts and screws the unit works great. Would be 5/5 if didn't need to tighten bolts and had some way of storing the safety pin ON the unit.

fait le job. A l'air solide

Great value unit all works well. Well packaged and easy to assemble.