Reseñas de clientes para Torno compacto para metal VEVOR de 18 x 35 cm (7" x 14"), con velocidad ajustable de 0 a 2500 RPM y mandril de 3 mordazas de 10 cm (4"), ideal para metalurgia, diseño de sobremesa para proyectos de torneado de metal.

Overall good product, had one minor issue when the item arrived, the magnet for the RPM sensor was missing, I contacted customer support and they took care of the issue by sending me not one replacement magnet, but grisly sent me 5. I would recommend this induct.

This lathe is great for beginners, but also remember what you're buying. This is a project dressed up as a lathe, it has many problems that you can actually fix with the lathe itself, you can turn it's own parts for it fairly easy. Out of the box you need to clean up everything, tighten gibs, oil ways and gears. as the lathe comes, everything is loose and sloppy, but you can tighten gibs and screws to make it pretty tight and rigid. I've turned brass, aluminum, copper, mild steel and stainless steel with this thing and it's pretty accurate out the box, my tail stock was perfectly dead center when it arrived which was great. I didn't replace the motor or any large modifications, the lathe itself can turn all this. But if you get a new motor and replace the spindle bearings with angular contact bearings, it can take MUCH larger Depth of Cuts and just be all around even better than original. These are on my todo list. You'll spend more in tooling than you will the lathe, trust me, but if you want something to tinker with and learn from, this is the lathe for you. At the end of your journey of fixing it up, removing slop, making parts for the lathe itself, you'll be left with a very useful tool that you won't regret. But it's a rough road at first, especially without tools. The tools I got are: Tail stock tools: • Woodworking MT2 Heavy Duty Live Tailstock Center $20.27 • Accusize Industrial Tools 5pc ANSI M42 (H.S.S. + 8% Cobalt) Center Drill Set, 0556-5500 $25.62 • WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper $17.08 ______ Cutting tools: • Gluwoer 1/2" SRACR/L1212H06 Lathe Turning Holders Lathe Turning & Profiling Tool Holder,12PCS Kit-2PCS Metal Lathe Tools Holder 10PCS RCMT0602 Round Carbide Milling Insert for Metal Steel $26.35 • Carbide Lathe Tools -Lathe Threading Tool Turning Holder - Boring Bars SNR0008K11 / SNR0010K11 / SNR0012M11 with 3 Indexable Carbide Inserts 11IR A60 for Lathe Turning Tool $26.99 (interal threading tools) • Carbide Lathe Tool

This is a very capable machine for the price. You will need to have some basic mechanical aptitude to set it up correctly and fine tune the machine as it is workable right out of the box but not great. After 3-4 hours of re-assembly, sanding down burrs, flattening certain slides with a stone, this machine is excellent. It machined a grade 5 bolt steel without issue. Very impressed

I looked and hunted, and hunted and looked at a lot of small metal cutting lathes before I decided to buy this one. I even went and looked at several first hand just to see what they were and how they were built. I have to say that I am very pleased with this lathe. I bought the 8x14 version and couldn't be happier with my purchase. All I had access to before was my brother-in-law's old Craftsman metal lathe and after working with my Vevor lathe a few times has made me realize just what a piece of junk that Craftsman was compared to this Vevor. Being a retired machinist of 46 years helps you recognize good tools from bad tools pretty easily. Definetely several steps up!! Excellent little lathe!!

I bought this lathe with a mindset that at is cheap.But boy I was pretty happy with it when it came everything was very nice . Every thing lined up I would tell anyone that wanted one too get it great value for the money

Set up lathe and had a minor issue [ two loose screws ] and support were right onto it, I have used unit a bit now and find it fantastic so don't be afraid to purchase from Vevor

Yes I am pleased basically overall.The only thing I had to was to tighten the grub screw on the sadle wheel.The lathwe seems quite acruate. The only thing thing I do not like is not getting replies to my e-mails re I want to purchase a Tail stock Drill Chuck and the price for same. The only other thing is a Phone number in Australia so I can purchase accesseries and not given a www.----site I really want to talk to someone. Regards Alan Tomkins

Works good , fast shipping , good value for money. Over all I am happy with the product thank you vevor I’ll be buying from use again

I had my reservations about buying this lathe as the quality and accuracy was unknown but I was very pleasantly surprised. after a good tune up adjusting all the gibs and getting everything properly lubricated/aligned it has proven to be a real workhorse more than capable of making accurate parts. rigidity is fine, it will cut mild steel no worries but a spring pass is required but this is true of even much larger lathes. I have no issues recommending this lathe but be prepared to spend a bit of extra money on upgrading the tool holder and metal gears if you plan on doing a lot of thread cutting.

Unit needed some adjustment at first along with adding some shims but overall , very strong and sturdy and surprised at the accuracy on the chuck.