Reseñas de clientes para Torno de metal compacto VEVOR, 20,3 x 35,5 cm, velocidad ajustable a 2250 RPM, 650 W de potencia, torno de ingeniería de precisión para metalurgia, ideal para trabajar diversos metales.

Over-all, a good mini lathe for the price. I wanted the metal gears, but was surprised to see that they where mounted crooked... The tool carrier has a lot of play. So you must expect to put some work into it to make it fully functional. Not an out-the-box perfect tool.

Recibí el artículo y solo lo abrí para ver qué llegó bien, no lo he probado por falta de espacio en cuanto lo pruebe subiré un comentario.

I purchased the MX 8x14 lathe because of the size and higher powered motor over the 7" options. The lathe needs a good cleaning and the gibs all need adjusting. Do use way oil to lube all the ways and ball oilers. The included motor/spindle belt is terrible and will break with little use. I changed mine out for a 470mm 5mm pitch 9mm wide standard belt and changed yhe motor pulley to a 17T 5mm pitch pulley. The motor shaft is 10mm. It arrived on good shape without any damage to the lathe or packaging. It wad packaged well in a wooden crate.

The tooling that came with the lathe will not start a cut but luckily I had bought some indexable tooling to get started. The tool post is very wobbly and there was an oiler check valve broke off the feed screw. It is a bit expensive for such low quality but it is also just a Chinese mini lathe

Very light quality products

I wanna start off with, it’s a good cheap mini lathe. Don’t expect heavy duty, it’s cheap.. I’m rating it as an overall 3 star, to me $800 is a little on the expensive side although it’s still a decent machine and will get things done as needed. my biggest concern is when I opened the box the plastic tool box it came with was opened and damaged. Lid broke off and parts everywhere including the tiny bolts and nuts for the protector guard (as seen in photos) which I can only find 3 out of 4 with no nuts which is pretty disappointing and kind of worry some for how this has been handled during shipping. Will update if I can later down the road as I use it more often.

The tool post and the supplied tooling won’t work with this lathe

The Good: Relatively low price for the size and features Lathe is well packaged in a wood enclosure, secured at the base, and Styrofoam blocks used on both ends. Delivered on time General appearance good Tailstock lock/unlock works nicely Nice tool box with accessories included Variable speed with good power RPM display is bright and easy to read Chuck is a good size and works well The Not so Great: Inch indicators look cheap and are hard to read On/Off button E-Stop cover is fragile and you have to open every time to turn on machine Noisy carriage rack and pinion gear mesh when moving carriage Noisy motor and gear train during operation Catch pan is small Owner manual is a Xerox copy Mounting locations different from other mini lathes Dents in gear cover – Not from shipping. The Unacceptable: Carriage power feed knob not accessible unless gear cover removed – This is a safety concern. Carriage power feed cannot be turned off, so the lead screw is always turning - There is no neutral position Carriage power feed control lever loose and cheap feeling Tailstock knob has slop in the bushing, making is loose and cheap feeling No room to add a carriage lock – This is a much needed upgrade on these small lathes

Takes some work but can be made pretty good lots of things to fix but vevor is really great to work with they are very helpful . instruction manual is not great but YouTube videos can help.this has been a great learning process for me an old retired guy

I promptly received a UPS tracking, delivered within about 48h. I give 3 stars because it currently still sits in multiple bins of disassembled, cleaned and pending completion of the thorough CLEANING AND DEBURRING that IS REQUIRED on almost all parts without exception. Paint, metal shavings, and even casting sand! are hiding between almost all of the parts, and a complete and careful teardown of everything is essential.! Gears, Headstock, Covers, Cross-Slide, Lead Screw, Tail Stock, handles, even the chuck... The gear cover did not bolt to the headstock properly, the holes were drilled poorly and threads were incomplete and misaligned. The timing belt/drive belt is improperly tensioned and about to tear itself and the gears are full of gunk and need deburring and realigned. The magnets for the RPM display fell off (seems minor, but could cause a major wreck!) and the Sensor bracket is flimsy and falls in the way of the spindle. There is no provision to protect the electronics from metal shavings and other debris or liquids due to both their placement and the gaps all around the enclosures. I had to clean, vacuum, reroute wires and install grommets to prevent sharp metal from cutting the wires + installing gaskets. The tail stock is a mismatched mix of cast iron and cast aluminium, specifically the Morse Taper #2 iron/steel sleeve into an aluminium bore gunked with paint and shavings. The base and plates are pending modifications to make them match the bed properly and sit square/flat. The cross slide got a teardown, cleaning, deburring and is pending modifications to fit the bed properly. The bed needs cleaning deburring and filing/machining the feet flat to remove the twist induced when bolting it. The prismatic ways do not match the machined prismatic grooves of either the headstock, cross-slide or tailstock. It is a project that requires skills, patience and important knowledge base and the ongoing curiosity to pursue research into techniques in order to fix the inherent defects. One must also have or obtain a selection of precision measuring instruments (and skillset), power tools and ideally access to a proper lathe or milling machine. I don't own or have access to either another quality lathe or a milling machine. Could I have used it out of box? Maybe, but not without breaking the machine prematurely due to burrs and metal debris/casting sand stuck between parts. I tried after an initial thorough cleaning (without tearing everything apart) and it ran, but with concerning grinding noises and the sound of something bouncing in the gears (the magnets...)