Reseñas de clientes para Motor eléctrico VEVOR de 0,75 HP, 1725 rpm, CA 115 V/230 V, chasis 56C, motor compresor de aire monofásico, eje con chaveta de 5/8", rotación en sentido horario/antihorario para maquinaria agrícola y equipos generales.
1725 RPM 0.75 HP
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
13 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
josh_eli Home user
1725 RPM 0.75 HP
This thing is solid with no problems what so ever. It came packaged so well that not even UPS could damage it rolling it down the highway. It was packed so tight it was actually difficult to get out of the packaging. machined C-Face mount is well machined and precise. I replaced a .75hp 1800 rpm motor on a Porta-cool and this does the same job as the original.
0 personas encontraron esto útil
Traducir reseña a Español
Al M Mr
1725 RPM 0.75 HP
Price was good. Way heavier than my old 3/4 hp motor. Can tell it is on my table saw.
Knock outs in box to connect wires are not knockouts. Need to drill them out to wire it.
Only used few times so can’t tell if it will last
0 personas encontraron esto útil
Traducir reseña a Español
Chas. User.
1725 RPM 0.75 HP
Motor arrived quickly, and was very well packaged.
I ordered the face mount version, and unfortunately it came with the foot mount also attached. In my application there wasn’t room for the foot mount and it was a big job removing it.
Just to be clear no where in the literature did they say the foot mount would be eliminated.
Cheers
Chas
0 personas encontraron esto útil
Traducir reseña a Español
CT Mr
1725 RPM 0.75 HP
Perfect replacement
0 personas encontraron esto útil
Traducir reseña a Español
David Edward Mr
1725 RPM 0.75 HP
Fast delivery and works as described
0 personas encontraron esto útil
Traducir reseña a Español
HANK MANTZ Easy replace of current motor
1725 RPM 0.75 HP
So far good. Vevor replaced a motor that was over 50 yrs old, so expectations are high. I installed using the auxiliary electrical instructions which are different than the one on the motor. The auxiliary instructions bypass the thermal heat protection feature which I thought was curious but I will not be using in any type of continuous use operation or heavy duty didn't investigate it further. Checked out motor before installing to verify that runs both cw & ccw. I installed it in my drill press without any modification of base. I test ran it without issues.
0 personas encontraron esto útil
Gary Slaby Worked
1725 RPM 0.75 HP
Works
0 personas encontraron esto útil
John M. Williams Good build quality, smooth running, great value
1725 RPM 0.75 HP
Nicely-made motor. I used this to replace a smaller motor for my 3-in-1 Mill-drill-lathe. It understandably needed a new mount but it was well worth it. Have only used it for a couple of weeks but the increased power and smooth operation makes it seem like a good investment. Good value for the money. Came with very good wiring instructions.
0 personas encontraron esto útil
Ron Setzkorn Mr
1725 RPM 0.75 HP
Works great
0 personas encontraron esto útil
Traducir reseña a Español
Oregon dispointed Work's good
1725 RPM 0.75 HP
Very impressed nice and quiet
0 personas encontraron esto útil
