Reseñas de clientes para Motor eléctrico VEVOR de 0,75 HP, 1725 rpm, CA 115 V/230 V, chasis 56C, motor compresor de aire monofásico, eje con chaveta de 5/8", rotación en sentido horario/antihorario para maquinaria agrícola y equipos generales.

Seems good. The junction box tabs are fully welded and don't pop out for access. I had to drill a hole.

Works good

Works for intended purpose

Overall this motor has been great. I’m happy with putting this on my bandsaw. I doubled the hp and it’s cutting aluminum and some steel great. The only issue I have was the knock out. I could not get them to come out and bent up the pecker head.

Great motor for shop equipment

Well I ordered this motor to replace mine on a table saw. I am somewhat disappointed that the motor is, physically larger, but seems to work flawlessly. By it being a larger motor the belt guard doesn't fit any more but I'll deal with it as the motor has enough power to drive my saw.

I purchased this 2hp 120/220 single phase electric motor to directly replace (rotational speed and h.p) the 3 phase 220/480 volt electric motor on one of my Engineer's Lathes that was built in the 1960's and formerly used in an industrial setting. I needed 120/220 volt single phase since my home-workshop does not have 220/480 volt 3 phase power. I have a number of 120/220 volt reversible "Drum" switches and did not want the additional expense of a VFD at this time so this was a sturdy and reliable motor to go with. The only down-side of this motor is the "Thermal Breaker" built into the motor's wiring box. The breaker is pretty flimsy and not up to the task so I replaced it with another that I had on hand which is more rugged and reliable - and also externally mounted. Doing this freed up space inside the electrical box for the wire nuts needed with the 5 wire electrical cord in order to make the hook-up to the 120/220 volt reversible drum switch. If the breaker was of better quality and outside the terminal box I would have rated this motor a 10.

Motor arrived several days after ordering, sooner than expected. Opened box and spun shaft, spun easy. Hooked up motor to an old drill press I’m working on. Motor has a slight vibration but not bad. Amps checked out good. Have only used a couple of times but seems to be worth the price for a motor that will only be used every once in a while.

We bought for our greenhouse per the contractor. When arrived it was the wrong size although the contractor said it was his fault. You also do not have the proper one to replace it. We have tried to contact you to return it with no avail. Everyone says your products are great, but not customer service.

what a waster motor not working