Reseñas de clientes para Motor eléctrico VEVOR de 1.5 HP, 1725 rpm, CA 115 V/230 V, chasis 56C, motor compresor de aire monofásico, eje con chaveta de 5/8", rotación en sentido horario/antihorario para maquinaria agrícola y equipos generales.
1725 RPM 1.5 HP
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
17 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
NG Owner
1725 RPM 1.5 HP
Delivered on time. Works great and as described.
0 personas encontraron esto útil
Traducir reseña a Español
Cameron Derouin Great Motor
1725 RPM 1.5 HP
We purchased this motor to replace a fan motor for a turkey farm tunnel fan. Out of the box the motor was noticeably great quality. We questioned the longevity of a new motor brand, especially since this was about a third of the price of our typical replacement motors. We installed this on a constant fan that has not shut down in weeks, and we have seen no overheating, or any other common issues that we would expect. We are purchasing more as we speak to keep in stock for further replacements. Would strongly recommend.
2 personas encontraron esto útil
Traducir reseña a Español
DaveH Struggling Woodworker
1725 RPM 1.5 HP
I bought this to upgrade the 1/2 HP motor in my Delta bandsaw. It was a good choice. It fit easily and is a clear upgrade. Very pleased with the purchase.
0 personas encontraron esto útil
Traducir reseña a Español
Michael Donnelly Used on 14" Harbor Freight Bandsaw
1725 RPM 1.5 HP
This motor being rated at twice what the saw came with has worked perfectly. I wired it to run on 240v to keep the current draw lower. The instructions for wiring 120v or 240v and reversing directions are fairly straightforward. This motor having a thermal overload is a big plus. The bolt pattern and shaft size were the same as the 0.75hp motor that I burnt up within a few hours of first running the saw. This motor was a bit larger and required a bit of modification to the enclosure for it to fit, but it has been a great upgrade. I would recommend this motor and will buy again from Vevor as long as they continue to keep their prices right.
0 personas encontraron esto útil
Traducir reseña a Español
bo*** LOW QUALITY JUNK
1725 RPM 1.5 HP
what a waster motor not working
0 personas encontraron esto útil
Traducir reseña a Español
Cameron Derouin Quality concerns
1725 RPM 1.5 HP
I previously reviewed this item and raved about it. However after a few orders the pricing has gone up about 33% in a matter of a year, while the quality has slightly decreased. Still a decent motor but at the rate they're heading you will be able to purchase a big name motor for near the same cost.
1 personas encontraron esto útil
Traducir reseña a Español
Ryan Don't buy
1725 RPM 1.5 HP
Product does not work. Runs for 1 minute then stops every single time even under no load. DO NOT WASTE YOUR MONEY
1 personas encontraron esto útil
Traducir reseña a Español
