Reseñas de clientes para Motor eléctrico VEVOR de 2 HP, 1725 rpm, CA 115 V/230 V, chasis 56C, motor compresor de aire monofásico, eje con chaveta de 5/8", rotación en sentido horario/antihorario para maquinaria agrícola y equipos generales.

Great value motor... Used for my restaurant hood system.

This thing is solid with no problems what so ever. It came packaged so well that not even UPS could damage it rolling it down the highway. It was packed so tight it was actually difficult to get out of the packaging. machined C-Face mount is well machined and precise. I replaced a .75hp 1800 rpm motor on a Porta-cool and this does the same job as the original.

As usual another great product at a very fair price from VEVOR. Customer service is also great for answering questions or concerns. Not my first VEVOR purchase nor will it be my last.

Great price, works wonderfully

This 2HP motor is a horse. Lots of torque. I am using it for an old belt drive milling machine. It's not really the best motor for this application. It is an agriculture and compressor type motor because it is not a high end, balanced motor. It has a bit of vibration to it. I mounted it like the previous 1HP motor and when it came on I thought a plane was taking off it caused such a roar to the whole machine. I double rubber mounted it and everything runs smoothly. Now, the problem is it starts so fast with all that torque that it is going to eventually tear out my rubber mounts. I have ordered a soft start controller to hopefully remedy that super fast start up. Other than those factors to consider it is a solid running motor at a great price. This motor has to be rubber mounted. I also switched over to a magnetic contactor as the switch on the machine is only rated for 10A and now I have a 20A motor. I get to use my old front switch to activate the contactor with less than half an amp so it will save the contacts in the switch from the high amperage arching this 2HP motor requires.

I did quite a bite of research and what was on the drill press was an open face motor which allowed dirt dobbers to build best inside the motor and eventually caused the motor to fail. This motor was a totally enclosed so eliminated that problem. The mount was adjustable to the press and the shaft and key way fit prefectiually. The motif runs quite and smooth and have used numerous times without any issues. The price was priced below the competition and I would highly recommend it if you are looking for a replacement motor.

Been running my compressor for 8 months, good as motors that are twice its price.

That is an awesome motor! It’s super quiet and great power! Now I need the same one but 5hp. Can you guys make it? 5hp 1ph 1725rpm 230v 56c frame

Motor is a great bargain for the price, work perfectly out of the box Came wired as 120 needed to switch that over to 240. Not too hard to do but does need a little thought to get all the wires correct, directions or very easy to follow

The customer service was great. I bought a 2 HP motor and it was damaged when I got it out of the box. They sent me a replacement part and I was able to replace the bent part and now it works perfectly. The 4 stars is just because of the damaged product but I didn’t put that on vevor. I think that was the shipping company’s fault.