Reseñas de clientes para Multiplicador de torsión VEVOR, llave/multiplicador de tuercas de rueda de 1 pulgada, juego de llaves multiplicadoras de torsión de alta resistencia, extractor de tuercas de rueda de 1:64 y 6800 Nm, incluye 4 vasos (21-41 mm) y estuche.

First time working on 16000 lbs trailer to replace tires. With this beast, no struggle with any of those big nuts. If you need working on large bolts and nuts, get one of this and say goodbye to sweat.

Great product been very happy with it used it 1 day offer getting it very happy with it being road train driver you change a lot tyres in middle of nowhere and don’t all way have battery in truck to use impact gun so this help But more importantly it’s used to get right tension

It was one of the BEST purchases I've ever made! The price was very reasonable for something that I carry with me and not need electric or an air compressor to use if/when traveling and may need to change a tire. I attempted to use an electric impact wrench that had 1080 ft lbs or torque and wouldn't break the lugs free even if I used it in the proper direction. I will caution you to be sure you're not turning in the wrong direction as you will strip the lug bolt, lug nut, or both, which is what I did, as I was unaware that the dump truck that was a recent purchase had reverse threads on the left front wheel. This wrench was very easy to use, but it did take a little strength and stamina, as I had to crank it about 10-15 cranks to get the lug nut loose enough to switch to the faster removal tool, which eliminates the multiplier (simply the crank handle, a 1 in extension bar and the socket). You won't regret this purchase if you need to change a tire just one time. This tool will actually save you a lot of time.

Réception dans les temps remarquez que pour la qualité et facilité à l'emploi je n'ai mis que la moitié car je ne peux pas encore dire car pas encore utilisé. Sinon il me semble que vous êtes un bon service donc à continuer ds ce sens

I was surprised how easy was use of multiplier. Looks good quality. Price is unbelievable. And I am very satisfied with Vevor services.

Wonderdull . J ai fais tout le camions en un rien de temps! I fix all what i have to do to go back to work

Bare synd de tar betalt for mva men ikke sender med VOEC så man ender med å betale mva igjen når den behandles av posten i Norge.

I have had great success with every thing I have purchased from vevor

The end of the wrench shaft is 1" square and you will want a way to turn it with a drill or drill driver. The extension rod for the handle is not strong enough to use for loosening or tightening the nuts onto the studs, it is aluminum. Use it only for turning the loose nuts onto the studs. The unit is a 60 to one triple stage planetary gear reducer. It takes 60 turns of the handle to rotate the lug nut one turn. This is great for breaking loose really stuck lug nuts. If the studs are rusty and you have to fight them all the way off, you are going to want to have a power driver that can drive a 1" square shaft. I machined the corners so i can fit a 12 point socket onto it and drive it with a 3/4" cordless impact. This saves a lot of time. It works really well and allows Semi wheels to be removed and installed by hand. I had to buy a deeper socket in the size needed for my wheel nuts, because the studs extended too far above the nut and the short sockets supplied in the kit could not reach the nut. Over all, very pleased with this purchase. I did have to buy an extra deep socket, a steel 1" drive extension, and a 3/4" to 1" adapter. I think the kit should come with deeper sockets and a metal handle extension bar.

Bonjour Après quelques utilisations l'axe a du jeu.