Reseñas de clientes para VEVOR Pistola Pulverizadora de Pintura Neumática HVLP 600 ml, con Alimentación por Gravedad y 3 Boquillas de 1,3/1,4 /1,7 mm, Acero Inoxidable y Latón, para Muebles y Coches, 220 x 100 x 370 mm

Nagyon jó szórópisztoly. Nekem bevált. Bútorlakkozásra használom.

Great spray gun, easy results with minimal adjustment. Used it to spray base coat and mid coat on a 2022 Model Y Tesla front fascia. Has multiple spray nozzles for various spraying tasks. The paint I was spraying was expensive because I paid $200 for one pint of each. Good thing this gun worked great with minimal waste because otherwise I wouldn't have had enough to finish the job. I still had to spray clear afterward from a different source but didn't use this gun for that. Would definitely recommend to others and buy again.

Bonjour, jeux de trois pistolet à peinture de très bonne qualités, j'ai tardé à laissé un commentaire car ce n'était pas pour moi, mais pour mon frère !!!!!!! Cordialement, Gilbert G

Impeccable 👍

It’s a good value item, not for professional use, fair quality would buy again when in need for DIY small jobs

Works well for the price point

Second pistolet de peinture après un produit à 10€ dune marque de supermarché. Projection très propre époxy sur moteur et pièces moto. Il me manque maintenant une cabine de peinture et améliorer mon application pour éléments de carrosserie.

Awesome tool should have bought way sooner

Bon produit

I've used this spray gun with hydrated lime to spray old European stone/concrete cellars with high moisture. It did the job. The gun itself is very rudimentary, as it's basically just a feeder for the material in the hopper with a trigger. The hopper is held in place by a hose clamp and the mating surface on the gun has an O-ring, but that doesn't make the best seal, so runny materials can still seep through and end up on the side of the gun. The connector/adapter the gun comes with is meant to be hooked up directly to a naked hose, meaning it doesn't have a European quick connect. I took one from a different gun. The connector itself is glued in the gun and can't be unscrewed, so an adapter has to be screwed on the existing connection. The air once hooked up is always spraying, meaning the trigger doesn't control or adjust the amount of air at all - you need a regulator or an inline valve to control the air. I just uncoupled the gun every time the hopper ran empty since I had neither. Given that the material I was spraying (lime) wasn't very runny, it handled it extremely well - I used the widest nozzle (8mm), but could've gone with a tighter one to reduce consumption.