Reseñas de clientes para Alimentador de fresadora VEVOR con eje X, par de 150 in-lb, velocidad de rotación ajustable de 0 a 200 RPM, 120 V, para fresadoras Bridgeport de tipo rodilla con eje de 5/8" de diámetro.

Unit is excellent for the ungodly low price vevor sells it for. When looking at the name brands units at five or ten times as expensive this unit is hard to ignore. I am very happy with the quality and ease of installation. Took about ten minutes to install and set it up with the included shims. Very pleased would buy again without hesitation for another machine.

Just bought it this past week and installed on my Bridgeport 2 days ago and so far it is working perfectly. So much better than hand cranking. My old Bridgeport Z axis feed died last year. Very easy installation.

Installed this on an old 1963 Bridgeport Series 1 milling machine I am currently renovating that has already been upgraded with a 1975 2J2 variable speed head unit. Works very well and has plenty of power. Only issue is the woodruff key in the lead screw is 1/8" and the keyway in the brass gear is 3mm. Had to take .0035" off each side of the key that protrudes from the leadscrew so the brass gear would fit. Also had to make a spacer for the lead screw to position the bearing sleeve that comes with the unit in the right position to engage the roller bearing correctly. As with all of these type drives, they share the woodruff key with the handle and don't engage very much in the brass gear. I actually removed the leadscrew and added another #406 1/8" woodruff key that fully engages the brass drive gear so will not be an issue down the road. This replaced a very old Bridgeport mechanical drive that was really heavy and also broken. This required shortening the leadscrew by cutting it off, them turning it to the same specs as an original fully manual leadscrew, rethreading the end and making a sleeve with the correct shoulder and sized to fit the bearing sleeve that came with the unit and machining in two woodruff key slots. Was not the newer style two piece leadscrew for mechanical drives.

Fit without any modifications

Definitely worth it based on price. The instructions for setting the backlash based shims is ambiguous at best. I'm a hobbyist at best so I haven't put this theough its paces and can't speak to how well this holds up over longterm repeated use. The variable speed know works well, the engagement left and right ate pretty solid. The Z version of this product will be my next purchase.

El usuario pensó que el producto era muy bueno y le dio una reseña de 5 estrellas.

Installation was very straight forward and fit perfectly with the right shimming to our Bridgeport e-mill.

Great value for my usage !

Excelente servicio y celeridad en el proceso. El producto llegó en el tiempo indicado y en perfectas condiciones. La máquina cumple con las especificaciones señaladas. Líos materiales se aprecian de muy buena calidad. Esperemos que el funcionamiento sea el indicado como se indica en la descripción.

Cord was a little too short, and the verier adjusting lock nut is made of plastic. I have to use an extension cord because the cord is about 30cm too short. I don't thing the lock nut will last very long.