Reseñas de clientes para Crimpadora de tubos inalámbrica profesional VEVOR de 18 V, apta para tubos de acero inoxidable, cobre y PEX de 1/2" a 2", con giro de 360°, motor sin escobillas e incluye 6 mordazas de crimpado.

Hallo, ich habe lang mit mir gerungen da es schon ein stolzer Preis ist. Habe 25 Pressungen weg und muss sagen geht genauso super als wenn man eine Mietet. Kann es nur Empfehlen das Gerät. Für den Preis hätte ich mir aber auch noch die V18 mit gewünscht das wer noch Fair. Gerne wieder.

Used to using Nibco with 360 head. Not as good but for the price difference just have to double press . Will get you through a tight

My tool works fine, I have sent in several requests asking about HVAC heads for it. A little disappointed in customer service

I've only pressed 1 job in with this tool and it performed well. The jaws are a are definitely decent and are an all but copy of Milwaukee jaws. It really boils down to how long will it effectively last. So basically if your just starting your business this would be a be a good starter

Lighter weight than other brands, Power is still there! The shoulder strap is a game changer when you are moving with a ladder. I call it the handicap propress!!! Its awesome!!

Works great, a little bit heavy. Comes with 2 batteries, charger and presses from 1/2" to 2". It also has a counter on the tool to tell how many times it has been used. So far so good.

Awesome tool, the only flaw is the 1/2" jaw, it presses the inner ring of the fitting but not the outer ring.

I’ve used quite a few press tools and this has pros and cons. It’s actually quieter than my Ridgid 240. If I would have known how long it was, I probably would’ve passed on it. It’s big. And heavy. You won’t fit it sideways between floor joist while pressing. You’ll have to build some things down below and press then in lower than the joist. But. I do like the counter on the machine itself. I have around 80 crimps on it and seems to hold up well. Again. If you’re looking for a light press tools this isn’t it. I’m not sure I got the complete hang of it yet.. but I don’t think there’s a “off” button. The button you make the cycle with is the power button. If you long press it, it obviously makes a crimp. The jaws seem to open easier that my Milwaukee or Ridgid jaws I have. Whether that’s the quality or the spring is lighter, I’m not sure. Would definitely have 5 stars if it was a tad bit lighter and shorter.

Our company has one of the more expensive brands and ordered this one as a secondary after reading the other reviews. We had occasion to use both on the same job and here's my take. Performance was nearly identical. Vevor's press operation takes about 1/2a second longer but quality of press appears identical. Vevor is about 1/4 pound heavier which only becomes noticeable after numerous presses, especially over head. The product is definitely made from quality material and very well made. The heads are interchangeable with the other brand and press equally as well on either unit. For the price we are satisfied and only time will tell regarding durability and dependability. I would love for Vevor to manufacture the pivoting press ring set at a more affordable price.

It works as advertised, a little slower than my rigid and sounds a little more clunky but I’ve tested it well and fitting hold past 250psi so I’m happy with it I’ve already used it up to 11/2” next job it will have paid itself off.