Reseñas de clientes para Sierra de cinta VEVOR, capacidad de corte de 5 pulgadas, velocidad variable, manual, motor de 10 A, para metal, madera, tubos, tuberías, varillas de refuerzo y plástico

I have been using this unit since about mid January, 2024. Its a fine band saw for a small shop. Remember that this unit is a dry band saw, so don't use lubrication like you might see on a larger unit. The plastic pulleys make any lubrication launch the saw blades out of the machine. As long as you don't lay down on this saw like a crazy person expecting it to cut through 1 in of steel it will perform perfectly. I personally recommend using speeds 1-3 for metal and 4-6 for wood, but go ahead and experiment. One technique Ive had to use on this unit is using a high speed like 5 or 6 on metal with light pressure just to start the cut then I adjust back down to like 3 or 4 and it goes smooth from there. I like the quick adjust clamp, however I wish it was more robust, it just feels a bit weak, but has held up thus far. The degree markers are surprisingly accurate for angled cuts. Overall great unit for the price. And has lasted well since purchase. Written on 12/14/2024.

This has worked well on plastics, metal, and wood. I have cut thin steel up to 3” schedule 40 metal tubing. The inly downside is that it does not lock down and I would like more clamping options.

Great tool.. time saver .as described..the rest is filler B.S. because someone had a great idea of 100 Characters minimum

I was pleasantly surprised by the build quality and sheer weight of the steel base for this band saw. I was expecting something light-weight and flimsy which may or may not cut squarely, but found that it's built like the proverbial brick outhouse. I bought this for cutting Aluminium T-slot extrusions and it cuts through these like a knife through butter, producing cuts which are square and clean. The included manual is pretty rubbish and, in particular, the saw that I received has plastic safety guards over both wheels, but these safety guards are not depicted in the manual nor are any instructions given on how to remove them - I assume that this is a different version or new revision of the saw design but the manual wasn't updated to reflect the changes in design. You need to remove one Phillips-head screw on each guard and then slide them sideways to disengage the attachment points. The instructions for mounting the saw blade were similarly unhelpful, but I was able to work it out in the end.

Was a little difficult to set up from the box. Cuts accurately and very little noise. Quite happy with my purchase.

Works OK, broke 2 blades very quickly. Overall quality seems good, very sturdy construction. Extra motor brushes should be included. Also offer extra blades with initial purchase.

Wasn’t sure what to expect from this bandsaw but as it turns out it been very useful good accuracy with the cutting as long as you set it up right the first time no complaints after a while of using it

The saw is pretty good for its price. But the blade is of poor quality. I sawed through several bolts and the blade became unusable. There are no such blades on the Vevor website. I had to look elsewhere.

To have a bandsaw with a vise for under $200 you can’t go wrong. So far it’s been great hot rolled steel it does great. The only thing that I did not care for was the blade does not like high strength threaded rod not a big deal just burned up the blade

El repuesto de la sierra es difícil de conseguir