Reseñas de clientes para Sierra de cinta VEVOR, capacidad de corte de 5 pulgadas, velocidad variable, manual, motor de 10 A, para metal, madera, tubos, tuberías, varillas de refuerzo y plástico

As solid as ones way more expensive . Every feature that $400 ones have . No problem cutting for hours at a time , thick steel

Awesome products and bandsaw only main concern was it was not cordless as it stated. Originally wouldn’t have been problem but doing a lot of work on residential roof tops.

took a bit longer than 2 days to receive the bandsaw, however it did arrive in good order. the directions need to be better for those that have never used this sort of tool before, i have so i did not have any trouble figuring out how to remove the guards and install the blade (i opted for a harbor freight 18tooth blade) the blade is easily installed "if" you place the blade in the bearing guides "first" then warp the blade back over the drive wheels making sure to release the tensioner first. that can be determined by visually moving the lever and watching the wheel move toward the other wheel. pretty simple once you take a look at how to do it. if you try to mount the wheels first and then make the blade fit the bearing guides? well good luck doing that! this machine is very well built, nice heft, not some light piece of crap but something that has the feel of a quality tool. the motor runs smoothly without vibration or unusual noise. i suspect repair parts can be had from harbor freight, via their bauer branded tool which appears to be the same machine as this vevor unit. maybe the same factory makes both units, not sure. as with any power tool, one should remember to let the tool do the work and not try to add weight by pushing down. if you feel you need to add weight by leaning in on the tool, you are probably cutting hardened steel or have a dull blade. either change to new and proper blade or stop trying to cut hardened steel. for the price this vevor unit is a winner, with a nice balance of quality/features and price. will this bandsaw last as long as one of the big name manufactures offering? maybe/maybe not, but i suspect treated correctly this unit will last the hobby/diy/intermittent user a lifetime. i am looking forward to building a vertical stand for this unit and also one to allow for horizontal fixed/vise operation, and it works out to be what i think it will prove to be, i will be ordering another one or two! highly recommend this tool for the home shop/diy/intermittent user, and would also suggest professionals that need a porta band saw every once it a while take a serious look at this Vevor unit. unless you are a professional plumber that uses a porta band every day, day in and day out, it is hard to recommend paying 3x the price of this unit.

Works as well as a Milwaukee but not as pricey have used it a lot fabing gates cutting angles and it cuts as true as my DeWalt with no problem am really happy with it thanks

A port-a-ban is a tool I used every day as a pipefitter. This is basically a Milwaukee tool for a third of the price. The quality and the fact that you can get a replacement blade at any hardware store. I’m happy with the deal

I saw a review jy John Gadogan from Auto Expert whom I conside a fair dinkum and direct sort of a guy. John convinced me to give the Vevor unit a try si I did. A great little saw that very reasonably priced and does a fine job cutting tube and box section and flat bar up to 1/2" 12.5 mm thick x 3" 75 mm wide. with ease. cold cut not sparks or sharp burs and does it quietly. I had first thought to get a metal cutting blade for my Mitre saw, or one of those Evolution carbide saws but that were 3 times the cost and a Metal cutting saw blade was around $100 for my Mitre saw and that would have made heaps of little metall chips and lots of noise. this band saw is very quiet and leave only the fines from the .75 mm thick blade as it cuts . the saw on the stand has the ability to cut miters and once set is great for repeat mutli cuts with a very good level of control and accuracy. Highly recommend this.

Für den Hobby Bereich völlig ausreichend. Ware kam gut verpackt und schnell an. Die Anleitung ist sehr dürftig, nicht in deutsch und die Fotos kaum erkennbar daher Anleitung auf YouTube ansehen. Unglücklich ist der Kabel Austritt vorne am Handgriff, habe ich mit einem Kabelbinder gelöst. Eine tolle Maschine, würde ich wieder kaufen!

Purchased this portable bandsaw to cut aluminum stock down to size and mill on my bench mill (Millennium Machine Milo V1.5). Works great, makes quick cuts through the aluminum stock. Great price and fast shipping. Highly recommended.

I made this review late for I want to comment only after I use it for a while. Over the year, I used it to cut up various metal stocks, to 2x2 1/4 wall tubing smoothly. I can lift the saw from station to become portable and trim off sharp corners of the angles on my 5x8 trailer. Just need to be patient when using it. The blade is sharp and quality. Today the saw blade broke apart. I need to order new saw blade, hope they have stock the saw blade.

For the home shed it’s great Don’t use that often but when I need it I’m glad I’ve got it Works without fuss Accurate and reliable