Reseñas de clientes para Soldadora por puntos portátil VEVOR, máquina soldadora por puntos de 1/8 de pulgada con capacidad de entrada de 1,5 kVA, pistola de punta de soldadura portátil, máquina de soldadura por puntos de chapa metálica para placas de acero

Det virker som et bra solid apparat. Men størrelse på sikring burde stå oppgitt sammen med framsiden til produktet. Her i Norge er det mest vanlig med 16 amp sikring på en fase. 3 fase er det enten 3 x 16 amper eller 3x 32 amper sikring. Det vil si jeg har kjøpt meg et aparat som ikke er brukanses for meg. For jeg har 1 x 16 og 3x 16 kontakter i mitt verksted. Det er ikke noe rart jeg ikke får.det til å virke ordnlig.

Excelente herramienta para chapas de lámina negra

excelente producto

Nice product excellent price.

An excellent addition to my shop. Great quality and value. Worked flawlessly on a project I needed it for. The only flaw is the weight of the tool makes it a little awkward to maneuver.

Received and tried to weld 2 pieces each 1/8" thick. It did a great job and wasn't able to hammer them apart once welded. Very nice spot welder.

It’s heavy and awkward but a good tool to have if you need one. I hooked a bungee cord to my ceiling and attached to it which really helped with lugging the thing around

This is an excellent unit that is easy to use for automotive sheet metal. The only downfall is the weight of the machine when having to hang onto it to weld

It works well. It is heavy for portable but I would prefer it that way because it feels built better. So far very happy with it. I have only used it a few times. It only takes a split second to weld on clean thin metal.

I have wanted one of these for years, but always ended up using the mig welder or screwing things together. Ran across a nice big restaurant strainer made of stainless that the handle was spot welded on, but had broken loose. I didn't want to buy the correct gas for the mig and didn't want screws in the handle, so I bought this. Cleaned up the metal on both pieces, clamped it on, held the button just a couple of seconds and it worked great, so I went ahead as it originally had about 8 spot welds, and did 7 more. I should have bought one years ago, lots of projects would have been much quicker, easier and cheaper, since I would not be using any wire or gas.