Reseñas de clientes para Taladro de banco VEVOR de 3,2 A y 5 velocidades ajustables con 650/1050/1800/2350/3100 RPM, giro de 25 cm, estructura de hierro fundido, mesa de trabajo inclinable de 0 a 45°, luz de trabajo, para taladrar madera y metal.

purchased a week or so ago. Very disappointed in the way it was packed and how it was set up. Box heavily damaged. Small white foam beads everywhere. Manufacturing manager needs to be fired. No quality control. Nothing fit. Parts had orange paint sprayed INSIDE the parts that were supposed to fit over other parts. I spent several evenings after work,filings "burs" and pieces of metal as well as removing paint from the INSIDE of parts. The crank to move everything up and down the main pole would not work. I took it apart and found it was "CLOGGED" with foam pieces from the packing that were in all the worm drive gears. The support roller would not budge as it must have been hammered into place. After lots of lube and pulling using two people, it was removed. I had to re-drill the holes to get them to work. Lots of dents on the table and roller supports. I have bought over $1,800.00 worth of tools and am about to stop. The only people who "seem" to get working products are the guys who get them for free on YouTube to review.

Damaged wirh zero gelp from vevor will call bank.

This is one of my expensive purchase with Vevor and was hoping it will go smoothly. However, the packaging arrived with a damaged corner and seem to have been opened before. It is hard to tell if the impact of the damage will cause any performance or behaviour issue, even longevity of the drill press. Vevor support reckons the high vibration and level of noise it produces is normal due to it being high power, after showing a video clip. I a bit weary of purchasing anything heavy next time at Vevor that comes with a big price tag.

Not happy it states it goes down to 610 rpm and it says on pulley speed adjustment 650??

Instructions were absolute crap. Quality is questionable and parts fit together....not so much. Love most Vevor, this one gets a big thumbs down.

Drill press is nice but doesn’t seem to have any more power than my old 1/3 ho drill press. Also nut holding spindle pulley will not stay tight do drill press is useless.

Bien pour du petit travail

+ : Werkt prima, geluidsarm,verlichting en de traploze snelheids bediening is een extra plus.. - : Boor armen (3x) komen te gemakkelijk los, borglijm of een vaste aanslag is wenselijk.

You get what you pay for. The price is right however I'm not at all pleased with the arbor and the chuck. It's damn near impossible to mount the chuck on the arbor and maintain it perfectly centered and this is why you buy a drill press. Both the arbor and the chuck should have been a threaded assembly.

Gute Verarbeitung, aber könnte mehr Drehmoment haben. Für meine zwecke nicht stark genug. Trotzdem für den Heimwerker super Gerät.