Reseñas de clientes para VEVOR Tanque de presión para pintura en aerosol, 30 L/8 galones, con agitador manual, sellador de fugas para la industria, decoración del hogar, arquitectura, construcción, pintura automotriz, 70 PSI máx.

Ottimo prodotto di fattura piu' robusta di quanto mi aspettassi

Mi arrivato difettato il pezzo sopra che carica con il compressore

Super Teil, hat alles prima geklappt.

I gutted the inside to use as a pressure pot for epoxy molds. My projects come out bubble free.

I needed a bigger pressure pot for resin casting. This came fully assembled. I only needed to remove two pipes from the inside to make it a pressure pot instead of a paint pot. Same quality as the other name brand.

Grundsätzlich ist der Topf top. Jedoch hat er innen eine stange welche die arbeit mit Resin etwas mühsam macht. Leider gibt es keine möglichkeit die zu entfernen. Weshalb ich bei höheren Resin dingen eher davon abraten würde. Wenn man das rohr abnehmen könnte wäre er perfekt. Wir wollen die verlängerung jedoch nicht Gewaltsam entfernen aus sicherheitshründen. Also atbeiten wir bestmöglich rund herum

Dear Vevor team, This is to inform you that I recently bought one of your paint sprayer, a 10 litre pressure paint pot feed spray gun 1.5mm Nozzle Paint sprayer for 10 litter capacity painting. My doubt is, do I use it with an air compressor? If not, how can the paint pot feed build pressure inside the tank that release the spray. Counting to hear from you anytime soon. Regards, Edward Wilson

Très très bien je recommande Au début du mal l apprivoiser Du bon travail pour le prix Très bon rapport qualité prix

Nog niet in gebruik maar ziet er goed uit

The product is good except that needs some improvements. The two transparent pipes are to stiff and get curled easily thus making it difficult sometimes to handle. There should be a pipe extension connected to the straight pipe in the tank so as not to have left over paint which cannot be sprayed out and also to have a mesh filter. The rest is fine