Reseñas de clientes para Toldos VEVOR para entrada de puerta, 96,5 x 198 cm, toldos exteriores para puerta principal y ventana con drenaje y soporte de ABS, protección contra lluvia, nieve y sol, toldo de policarbonato para puerta de porche o patio, gris ahumado

The awning is 100% plastic won’t rust a bit flimsy. A little tricky to assemble but is not difficult. I wanted a small roof cover above my workshop door to keep dry on rainy days. It dose that and we will have to see how it holds up over time.

This was extremely difficult to put together, most of the screws broke off when we put them in the awning. Hope it holds up in the rain, etc. It is exactly what I wanted over the door to keep rain off the deck. It looks great now that it is up but it took ALL day to install, we are near 80 yrs old, don't recommend for old folks to put together .

It is definitely a two-person job putting this thing together it's in a zillion parts.. I would like to see this thing shipped as one piece.. this is not a piece for an amateur mechanic to put together..

The measurements are deceiving. Turned out the awninh was 40 wide and 38 long. So awning didn't fit. Was able to sell it to a friend. Product is acceptable

Liked eveything about it, except the material of the window shades being way too thin material that I'm afraid a strong wind or light hail will shred.. feels flimsy

When I received the first shipment it came in as repackage Merchandise damage panels no hardware. But when I contacted support they took several days to make things right. New package came in today I went to assemble it but some hardware missing had to go to store to get screws that where missing, quality control is missing on the packing line. You need two people to put unit together it is not a one person job, the hanging brackets are steel cross members are thin aluminum channeled. The panels are cheaply made, not real strong plexiglass seems flimsy construction and I do not know how they will hold up against New York winds or snow I will have to get back on that matter. The unit as a whole would have been made better with real plexi at least 1/4” thick along with the stronger channels that they mount to. The instruction manual is not clear as they could have made it they did put a video out but watching it does not really portray the real assembly as clear. All manufacturing of parts and Manuels should be clear but they are computer rendered with Etcha Sketch I realize this is made in China and they do make some wonderful things well, but every company can improve to make things better to make that company great and want to grow larger with better products. Note: I have purchased other products from this company and they work well without problems.

Disappointed that the frame was plastic. I live in a cold climate so don’t know if it will standup to the harsh weather.

Good day too you my order was in time that was very impressive the only thing I did have a Problem with the Frontal fixing Bar were Damage other from that everything where great looking too buy again. Thanks Richie

Cheaply made but priced accordingly. Instructions were vague, don't attempt w/o at least 2 ppl. Mounting bolts very insufficient for most wall types. Spacing/width of panels do not align with Canadian building codes. Mounting bolts etc not for hollow walls?

Seems to be well made. You do need help assembling as it is hard for just one person to hold everything together. I have not been able to install as I have to make a template for the mount holes to mount as the template sent was paper and was damaged during shipping