Reseñas de clientes para Yunque de hierro fundido VEVOR, 132 libras (60 kg), yunque de un solo cuerno con encimera grande y base estable, yunque de cuerno redondo resistente de alta dureza para herrero, para doblar y dar forma
132 libras Negro
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
614 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Top mais un peu chère
Enclume très pratique, elle est facile à utiliser, mais un peu chère pour la taille.
Je la recommande fortement.
0 personas encontraron esto útil
Traducir reseña a Español
A
44 libras Azul
Works great as my first anvil fast shipping plan on gettin a heavier one eventually but this one has done me good for over a year amd still working
0 personas encontraron esto útil
Traducir reseña a Español
Reasonably well made. Leg design terrible. Remove the paint
Overall this 60KG anvil from Vevor was a decent purchase for a newer blacksmith. I purchased this to use in addition to my old passed-down Fisher that's seen better days and has more sentimental value.
First things first...strip the paint. I used a wire wheel and removed all the awful paint from about 4" down from the top plate and from both horn ends entirely. Otherwise you're going to be smelling melted paint and possibly contaminating your work.
Second...the leg design and ring. Its awful. The leg design makes it hard to mount and the ring is deafening. So...i ended up using heavy chain to wrap multiple times around the anvil and lag bolt to opposite sides of my mount/stump. This took out the ear-piercing ring entirely.
Third, the pritchel hole is near useless. Its entirely too large. I'm going to see if i can find something to sleeve it and weld in place to shrink the pritchel hole diameter(1.1in from MFG).
Other than those few issues it's a great deal. I've already used this anvil for a handful of projects.
0 personas encontraron esto útil
Traducir reseña a Español
Mr.
Excellent quality for the price.
Functional and worth it compared to other suppliers!
Showed off to one of my other blacksmith friends and he bought one as well!
0 personas encontraron esto útil
Traducir reseña a Español
Good anvil
Really good anvil for the price, the creature it came in was destroyed but the anvil for the most part was unmarred.
0 personas encontraron esto útil
Traducir reseña a Español
mr
22 libras Negro
Great for begginers and for little projects such as hooks, leaves even knifes. Good item to start and learn.
0 personas encontraron esto útil
Traducir reseña a Español
mr
30 kg
20 kg anvil was delivered to a different address, luckily I seen the van delivering it and went and collected it myself
20 kg anvil was delivered to a different address, luckily I seen the van delivering it and went and collected it myself
20 kg anvil was delivered to a different address, luckily I seen the van delivering it and went and collected it myself
20 kg anvil was delivered to a different address, luckily I seen the van delivering it and went and collected it myself
1 personas encontraron esto útil
Traducir reseña a Español
Doc
Arrived 2nd day. Chose 88lb since its will be used infrequently and I am too old to fool with much heavier ones. Also hardness higher than bigger heavier selections. Had a good ring until fastened down which dampened. Adequate work surface smooth and crisp edges. As advertised.
0 personas encontraron esto útil
Traducir reseña a Español
Good budget anvil
Solid, no major flaws. I had to spend a couple hours with a Dremel getting my Hardy tools to fit (the square hole) but better tight than loose! I also spent a few hours smoothing out the top, the surface has a surface grind, but the worst I have ever seen! Just rough, probably not an issue for most. It was flat, just rough. The hardness is good.
0 personas encontraron esto útil
Traducir reseña a Español
merveilleux
abordable, fait la job! je recommande cette enclume, livraison rapide, efficace pour petit travaux, bricoleur du dimanche sinon rien de plus a ajouter
0 personas encontraron esto útil
Traducir reseña a Español