【RELIABLE MATERIAL】- Color: Red; Nominal Diameter: 3/4"; Total Length: 300ft. Outside Diameter: 0.86"; Inner Diameter: 0.66"; Tube Thickness: 0.1"; Keep quick & constant hot/cold water flows. Made of PEX material, non-toxic, crack-resistant, leak-proof. Perfect for potable water or radiant floor water use.
【LONG LIFESPAN】- The flexible and impact-resistant materials ensure a durable, one-time installation for long-lasting use. Heating system's service time can be greatly lengthened. Smooth inner pipe, anti- scaling quality, increase heat dissipation efficiency & speed for energy-saving.
【EFFORTLESS INSTALLATION】- Compatible with different connection system & floor type, such as: Crimp connection system (crimp tool + crimp rings + crimp fittings); Cinch (clamp) connection system (cinch tool + St. steel clamps + crimp fittings); Press system (by Viega); Compression PEX Fittings.
【PREMIUM FLEXIBILITY】- Min.7" bending radius, this radiant floor heating system is easy to bend for different ground situation. Big pressure capacity: 188-217psi at 20℃; 101-108psi at 95℃. Temperature Range: -45 to 110℃(-47℉ to 230℉).
【DIVERSE USE SCENARIO】- Suit for home & commercial use, like: radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.
ANSI/NSF 14, ANSI/NSF61, NSF-Pw (certified for radiant heating applications).
UPC listed by IAPMO.
SDR-9 dimensional standards.
Description
3/4" PEX Tubing
This 300ft pex pipe is commonly used for plumbing, radiant & hydronic systems. It is quick to install, flexible and used on hot/cold potable water lines.
Standards, Certifications & Approvals
ASTM F876: Standard specification for crosslinked polyethylene (PEX) tubing.
ASTM F877: Standard specification for crosslinked polyethylene (PEX) plastic hot- and-cold-water distribution systems.
ASTM F2023: Standard test method for evaluating the oxidative resistance of crosslinked polyethylene (PEX) tubing and systems to hot chlorinated water.
CSA B137.5: Crosslinked polyethylene (PEX) tubing systems for pressure applications.
3/4" PEX Tube
Industrial-grade pex tubing, crack-resistant, leakage-proof and anti-aging after long year's use. Nominal Diameter: 3/4"; Tube Length: 300ft, longer than normal products.
Durable and Long-Lasting
Our filter is constructed with materials that are both flexible and resistant to impact, guaranteeing a prolonged lifespan with just one installation.
7" Bending Radius
Expands and shrinks with temperature changes and support freeze resistant, this tube is with min.7" bending radius(industry standard for 3/4" pipe) and excellent flexibility.
Various Tube Connection
Can be connected in many ways: Crimp connection system(crimp tool + rings + fittings).; Cinch (clamp) connection system; Press system(by Viega); Compression PEX Fittings.
Different Installation Ways
Suitable for many floors, like: (non-) structural concrete slabs; staple-up (between joists) radiant floor heat; "Sandwich" type radiant heating; Snow & ice melting systems etc.
Wide Application Places
Multi-use water pipe, applied for plumbing, radiant & hydronic systems, and potable water. Keep quick hot & cold water flows. Red color just for easier identification.
Type: PEX Tube
Total Length: 300ft
Nominal Diameter: 3/4"
Inside Diameter: 0.66"
Outside Diameter: 0.86"
Tube Thickness: 0.1"
Pressure Ratings: 188-217psi at 20℃; 101-108psi at 95℃
Temperature Range: -45 to 110℃( -47℉ to 230℉)
Min.Bending Radius: 7"
ANSI/NSF 14, ANSI/NSF61, NSF-Pw (certified for radiant heating applications).
UPC listed by IAPMO.
SDR-9 dimensional standards.
1 x 300ft 3/4" PEX Tube
3/4" PEX Tubing
This 300ft pex pipe is commonly used for plumbing, radiant & hydronic systems. It is quick to install, flexible and used on hot/cold potable water lines.
Standards, Certifications & Approvals
ASTM F876: Standard specification for crosslinked polyethylene (PEX) tubing.
ASTM F877: Standard specification for crosslinked polyethylene (PEX) plastic hot- and-cold-water distribution systems.
ASTM F2023: Standard test method for evaluating the oxidative resistance of crosslinked polyethylene (PEX) tubing and systems to hot chlorinated water.
CSA B137.5: Crosslinked polyethylene (PEX) tubing systems for pressure applications.
3/4" PEX Tube
Industrial-grade pex tubing, crack-resistant, leakage-proof and anti-aging after long year's use. Nominal Diameter: 3/4"; Tube Length: 300ft, longer than normal products.
Durable and Long-Lasting
Our filter is constructed with materials that are both flexible and resistant to impact, guaranteeing a prolonged lifespan with just one installation.
7" Bending Radius
Expands and shrinks with temperature changes and support freeze resistant, this tube is with min.7" bending radius(industry standard for 3/4" pipe) and excellent flexibility.
Various Tube Connection
Can be connected in many ways: Crimp connection system(crimp tool + rings + fittings).; Cinch (clamp) connection system; Press system(by Viega); Compression PEX Fittings.
Different Installation Ways
Suitable for many floors, like: (non-) structural concrete slabs; staple-up (between joists) radiant floor heat; "Sandwich" type radiant heating; Snow & ice melting systems etc.
Wide Application Places
Multi-use water pipe, applied for plumbing, radiant & hydronic systems, and potable water. Keep quick hot & cold water flows. Red color just for easier identification.
1 x 300ft 3/4" PEX Tube
Type: PEX Tube
Total Length: 300ft
Nominal Diameter: 3/4"
Inside Diameter: 0.66"
Outside Diameter: 0.86"
Tube Thickness: 0.1"
Pressure Ratings: 188-217psi at 20℃; 101-108psi at 95℃
Temperature Range: -45 to 110℃( -47℉ to 230℉)
Min.Bending Radius: 7"
ANSI/NSF 14, ANSI/NSF61, NSF-Pw (certified for radiant heating applications).
UPC listed by IAPMO.
SDR-9 dimensional standards.
Questions and Answers
(0)
Typical questions asked about products: Is the product durable? ...