Reseñas de clientes para 2 x culata de 18 mm para Ford F-250 F-350 F-450 F550 6.0l Powerstroke Diesel

Its great for the price, and for a stock engine. But if for a modified engine it is a great starting point. Small modifications are needed. The castings are are a great starting point, the valves and springs are good enough for stock engine but not a performance one, plus runners need to be cleaned up at minimum or ported for performance eng. But it is still a good starting point

I loooove the heads my only issue is finding spark plugs for them. Only place had the plugs for these heads was Napa and they cost 140 for 8. The plugs are NGK 953594. Plugs need to have a 25mm reach.

Was willing to take a chance on these for an engine build. Good price and appears to be good quality for our needs.

A GREAT piece and price. They already have Large ports. A really nice piece. Thanks

They look good, the only problem is there is no specs for the valve springs. Can you run them with a roller cam etc?

Great heads did a 650 hp build with these heads for a 6.4 power stroke and there still going strong after 2 yrs great product and killer price highly recommend just as good as the big name heads

So far so good. I was a little skeptical to order these heads but after seeing them in person they look to be made very well. Install went smooth and they definitely improved hp over stock 350 cast heads. Keeps the engine alot cooler aswell. They came well package incase in foam and double boxed.

Everything is great thanks

A rendelés folyamata egyszerű és világos, jó az ár, a szállítás gyors és pontos, a nyomkövetés kiváló (GLS). Csak ajánlani tudom.

Heads beautifully machined but the attached parts, most likely out sorced were in poor condition, we did leak down and then performed a complete valve job, tested springs, and found 4 exhaust valves not fully machined. Polished them and did triple cut reseat on the valves.