Reseñas de clientes para 2 x culata de 18 mm para Ford F-250 F-350 F-450 F550 6.0l Powerstroke Diesel

Alles super! Top Preis und Qualität! Schneller und unkomplizierter Ablauf und Versand. Gerne jederzeit wieder!

Excellent nice and good price the shipping one time .....................................................

They are well worth the money they are. Awesome you can't build For that. I've used several sets of these. Heads They work very well.

Purchased and installed.I checked head thoroughly before installation.All threaded holes and spring pressure and checked valves for leaks. I couldn't find one issue but I did take heed to warnings to use my original cam that measured same as cam that was on new head . At the time of this review my engine with new head has about 2 hours of run time and runs great . Time will tell . If any problems occur I will repost. I would have given five stars if I knew cam was usable but at this time definitely would purchase again if needed.

So far good fit and car is running well, lets see how long they last. 302 1979 ford 5.0. done a breakin and dyno 350hp ......................................................................................................................................................................................................................................................................................

Wrong ones he wanted the tilted not sttaight ugh

These heads look impressive and in many ways they are well built. Mine must have poor valve guide machining as now the engine puffs blue smoke on start up if it’s been sitting. It ran clean and smooth before. But I wanted a performance bump. Be careful with intake port gaskets. Stock 90s truck gaskets work but you have to line them up really well. Which was lifting them up vs stock position. The best thing to do is to take these to a machine shop to have them checked over. Especially the guides.

I purchased these heads sometime ago. I knew I was building another engine for my car. This is the first time I have not opened both boxes to verify exactly what I got. I will leave these heads would be okay for a stock rebuild or just replacing a heavy iron head IF THEY SEND YOU TWO MATCHING HEADS! My mistake was not verifying I did send them to get double checked by a professional shop and they quickly noticed.

I installed these heads had a problem with pressure in cooling system which I didn't have before got so frustrated with them I actually put a motor in it

Will NOT fit on an LT1. 1995 Camaro 5.7 LT1. Only 4 bolt holes line up. The inner holes are off by about 2 inches. The bolts go throuth the intake at 60 degrees but the threads are at 90 degrees. I just invested $700 in these heads and now I am out $700. Don't make the same mistake I made. It took me 60 days to get all the parts for the rebuild and now I cannot return them, I have no money, no heads, and no working car. THANKS VEVOR!