Reseñas de clientes para Cizalla manual para chapa VEVOR, sin garganta, para múltiples usos, con marco de acero sólido, montaje a presión, espesor máximo de corte de 1,8 mm (0,07 pulg.) para acero, cobre, barras de refuerzo y aluminio.

Denne saksa var skikkelig god! Har ikke klippet opp mot grensen på 1.9 mm. 1.2 mm som jeg har klippet er som smør.

Conforme à la description.

Does sheet metal shoes work great round corners straight lines excellent

I would compare this to any of the big name brands. Cuts very well and well built!

I bought this cutter because cutting copper with shears hurts my arthritic fingers too much. The unit is a bit wobbly in the handle and blade adjustment, though easy enough to remedy with some shims. Must definitely be anchored to a solid surface, though I had to detach the blade section to access bolt holes for mounting. I've not bee able to get the blade adjusted perfectly since then. All-in-all, it is helpful for cutting and trimming thicker copper and brass sheet.

Been using this for a month and really pleased. I'm using it for cutting sterling silver sheet and it cuts it like butter. I made a fence at the back and a bigger surface plate (attached to screwed on corner brackets with magnets) for cutting 90° straight cuts

Funktioniert gut! Muss aber definitiv festgeschraubt werden, ansonsten kann nicht genug Kraft aufgebracht werden.

EXCELLENT PRODUCKT. I RECOMMEND

bestens geeignet. Gute, dem Zweck angemessene robuste Qualität; verwende es hauptsächlich um größere u dickere (Form-) Teile aus- und auch Flach- u Rundmaterial auf Länge zu schneiden; bisher klaglos seine Dienste getan. Mit Modifikation, die Manfred Welding in seinem post anregte sind mühelos rechtwinklige Schnitte möglich...

Shear arrived well packaged, though the index tape was bent, crooked, cheap and clearly useless. The shear itself seems to work quite well. It left a clean cut on the Solarplate that I tested it with. I made a quick trip to Home Depot and purchased an $8 framing square and cut the short end off. There are three holes underneath where the index tape was glued on and I used those attach my new index guide (making sure to keep it square to the blade. BTW, the directions are basically useless beyond letting you know the blade has a coating that needs to be removed and then oiled before use.