Reseñas de clientes para VEVOR Pinzas para arrastre de troncos, pinzas para elevación de troncos de 2 garras de 32 pulgadas, pinzas para arrastre de madera de acero resistente, capacidad de carga de 1543 lbs/700 kg, herramien

I'm not sure about the quality. Main bars are good, plenty thick, but the cross bars seem a bit puny. Not terrible, but I'd like for them to be heavy steel. That said if they ever do break you have plenty of meat on the main bars to weld it back together. The instructions are kind of gibberish. I recommend you leave about a 1/16" gap at all the joints. If it binds up just loosen each joint. The main pivot/shaft might need a bit more gap. As others have said don't expect to not have to get off the tractor. Don't rush and keep the logs low to the ground. There are are lots of ways to get hurt moving logs with a tractor....

This is excellent way better than the one from northern tool. Excellent purchase

For the most these tongs work with little slippage. I have had it slip off a log a few times but I didn't place it well enough. Heavy Duty for lifting and of course work for dragging as well!

very well built and great price

Works as advertised with logs. I'm using it to move boulders and it would work better if the tips were at less of an angle.

Works great like it should. Quality built and I would buy it again.

They are everything they said they are and worked great for the job I had for them

Good enough.

Heavy duty while pulling straight back. The jaws open super wide but they can get twist if the log rolls and bend out of shape iff the log rolls while pulling. I’ve pulled logs up to 3 ft. across and 8 ft. long. Overall I’m pretty happy and I would recommend it.

Plutôt efficace, bon équipement , livraison rapide 👍🏻 Il convient toutefois d’avoir un assistant pour éviter que le tronc ne tourne autour de l’axe et ne heurte le tracteur.