Reseñas de clientes para VEVOR Bastidor de Servidor de Marco Abierto de 9 U de Profundidad Ajustable de 584,2 a 1016 mm, Bastidor de Servidor de Red con Ruedas de 360° y 4 Postes para Equipos de Red, Equipos AV, Enrutador

Etwas scharkantig und die Metallteile sind minimal verbogen gewesen. Für den Preis aber voll in Ordnung.

Buenas tardes, Necesito factura con nuestros datos fiscales de este pedido: CABLEALIA INFRAESTRUCTURAS, S.L. CIF.: B98773989 Dirección: Avda. Cataluña, 9 Entlo 46020 VALENCIA VALENCIA Enviar a administracion@cablealia.com Gracias

Hay que hacer bastante fuerza para que los tornillos hagan las roscas, por lo demas queda muy robusto. Las bandejas podrian ser un poco más gruesas pero lo que es el rack si que queda muy robusto

Look at the metric sizes as the rack cannot get as shallow as 15", it is a little over 23". Good, solid, small server rack, but does not fit in the location I intended to put it in.

Super rack fiable et assez rigide pour mon imprimante 3d. Les trous des vis sont malheureusement trop petit et doivent être agrandis . A part ça tout est bon.

Rack pour serveur a très bon prix. Petit problème, le montage. Car faire un montage avec des vis auto perfo ce n'est pas tip top. Ce n'est pas gênant, mais si besoin démontage remontage du rack ça peut le devenir. Sinon très solide rien à dire.

The VEVOR 12U Open Frame Server Rack, is a nice equipment rack, and seemingly serves its purpose. Putting the rack together, on the other hand, may also seem a bit of a challenge to some who are not so mechanically inclined. The directions are not all that informative - thankfully there are a few illustrations which give guidance to complete the assembly. The bulk package of screws which are necessary to construct the rack, are self-tapping, and are extremely difficult to turn with a screwdriver by hand - but once seated, they secure the pieces in place. For the money - and based on your individual needs or use for such equipment racks - this, VEVOR 12U Open Frame Server Rack, is priced to suit most needs of the user - perhaps more so from a studio (in my opinion) setting where the rack would be "stationed," as opposed to be expected to survive the rigors from being moved from state to stage, while on the road.

Everything works great. Went together easy. Now sitting in the server room with 3 Supermicro 36 bay storage servers running on it. The only problem is with the top plate. It only fits with one depth. If you extend it at all, the top won’t fit on it and you will have to make one for it. I actually cut and stained a piece of 1/4” plywood for it.

Easy to assemble and surprisingly sturdy. Although I should have got higher. But I didn't know better.

A little time consuming to put together, the instructions are a little hard to follow but not as bad as most items similar. Once together works as intended and appears to be sturdy