Reseñas de clientes para Calzo vertical para rueda de motocicleta VEVOR, capacidad de 827 kg, soporte de acero resistente para rueda delantera de motocicleta con 6 orificios ajustables, para motocicletas todoterreno de 38 a 56 cm (15 a 22 pulgadas) y motocicletas estándar.

Love everything accept the welds look jenky..

Worked well to support a HD Fatboy in a 6x12 U-haul trailer for 1700+ miles. Tied the fork lowers down to the bar on the stand. Also tied down handlebars to the D-rings for some additional safety measures. Problem came when trying to pull the bike back out of the cradle. Would have worked better if I could have screwed down the stand to the trailer deck, but its a rental. Conversely my CBR600 pulled out of the cradle with no issues, roughly same weight (older bike), so tire diameter, weight distro and all affect the ease of pulling it out.

Good Quality material and ver stable. My 430kg bike pushes the stand away instead of rolling into the stand. delivery took 5 days longer than Promised and picked it up from depot otherwise I would have waited another 2-3 days

Perfect for a roll and go mount onto your lift out stationary mount to the concrete

When you load a motorcycle too much free space on the Axe central front wheel is going left and right approximately 1cm Too heavy 15kg Too big Too expensive for that tand

This chock is well made and a bargain for the price. It makes for a safe and steady brace while you work on your bike.

Este calzo para ruedas tiene una buena calidad de construcción. No se incluyeron instrucciones y el hardware estaba suelto en la caja. Tuve que buscar tuercas, pernos, pasadores y arandelas. Fui juntos sin instrucciones, por lo que tal vez no sea necesario. No tuve problemas en el montaje. Tuve que colocar un trozo delgado de madera justo antes y justo después del soporte de la rueda giratoria para acomodar el peso de una Harley Davidson de gira (900+/- libras). Considerándolo todo, estoy satisfecho; Es estable y se siente seguro incluso sin atarlo. Sin embargo, ¡la seguridad es lo primero!

This wheel chock is of good build quality. There were no instructions included and the hardware was loose in the box. I had to scrounge for nuts bolts pins and washers. I did go together without instructions so maybe not needed. I did not have problems in assembly. I did have to place a thin piece of wood just before and just after the rotating wheel holder to accommodate the weight of a touring Harley Davidson (900+/- lbs.) All in all, I'm satisfied; its stable and it feels secure even without strapping it down. However, safety first!

Bon matériel assez lourd donc assez robuste, par contre dommage que le réglage ne se fasse pas sur la cale arrière.

Krever modifisering før bruk. Begge platene er "slarkete" når framhjulet er på plass slik at sykkelen ikkje står stødig og risikerer å velte (Yamaha XMAX 300). Ved å borre nye hull i framplaten for å skru denne fast samt sette på ekstra skiver blei det bedre. Sjølve konstruksjonen er av god solid kvalitet og veier 17 kilo.