Seleccione el país/región, el idioma y la moneda que prefiera para comprar.
Calzo vertical para rueda de motocicleta VEVOR, capacidad de 827 kg, soporte de acero resistente para rueda delantera de motocicleta con 6 orificios ajustables, para motocicletas todoterreno de 38 a 56 cm (15 a 22 pulgadas) y motocicletas estándar.

Reseñas de clientes para Calzo vertical para rueda de motocicleta VEVOR, capacidad de 827 kg, soporte de acero resistente para rueda delantera de motocicleta con 6 orificios ajustables, para motocicletas todoterreno de 38 a 56 cm (15 a 22 pulgadas) y motocicletas estándar.

Opiniones de los Clientes

Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
92 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
FILTRADO POR
Compra verificada Filtros claros
92 reseñas
Traducir todas las reseñas a Español
Traducido
Ver original
Jim Akard Jim Akard
Mr
Easy to put together very sturdy I just don't know how hard it's going to be to get the motorcycle back out of it I put it in it haven't taken it out yet but it was a little harder to get in it than my last one but otherwise good quality easy to build
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Christopher Calliham Christopher Calliham
Awesome bike chalk
Love everything accept the welds look jenky..
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Russ Russ
Worked well, tough to pull out
Worked well to support a HD Fatboy in a 6x12 U-haul trailer for 1700+ miles. Tied the fork lowers down to the bar on the stand. Also tied down handlebars to the D-rings for some additional safety measures. Problem came when trying to pull the bike back out of the cradle. Would have worked better if I could have screwed down the stand to the trailer deck, but its a rental. Conversely my CBR600 pulled out of the cradle with no issues, roughly same weight (older bike), so tire diameter, weight distro and all affect the ease of pulling it out.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
RM RM
Sliding when try to push 43-kg bike in to the stand
Good Quality material and ver stable. My 430kg bike pushes the stand away instead of rolling into the stand. delivery took 5 days longer than Promised and picked it up from depot otherwise I would have waited another 2-3 days
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Nikola Tasic Nikola Tasic
Stand
When you load a motorcycle too much free space on the Axe central front wheel is going left and right approximately 1cm Too heavy 15kg Too big Too expensive for that tand
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Nicholas Nicholas
Good quality for the price
This chock is well made and a bargain for the price. It makes for a safe and steady brace while you work on your bike.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
Jimbo Jimbo
Harley owner
This wheel chock is of good build quality. There were no instructions included and the hardware was loose in the box. I had to scrounge for nuts bolts pins and washers. I did go together without instructions so maybe not needed. I did not have problems in assembly. I did have to place a thin piece of wood just before and just after the rotating wheel holder to accommodate the weight of a touring Harley Davidson (900+/- lbs.) All in all, I'm satisfied; its stable and it feels secure even without strapping it down. However, safety first!
1 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original
JouRey JouRey
Bloque roue assez costaud
Bon matériel assez lourd donc assez robuste, par contre dommage que le réglage ne se fasse pas sur la cale arrière.
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Francés
Ver original
Vargas Vargas
Bloque roue
Bloque roue  4
Reçu en temps et en heure mais arrive déjà abîmé avec manque de peinture et un peu piqué part la rouille donc decu
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Francés
Ver original
onthepegs onthepegs
good
I have a 21", 90 width front wheel which is a little thin for this so doesn't hold the 250kg bike secure enough. I have a simple solution: kick down sidestand, put a little stone under it and done. No wind is strong enough to tip the bike like that. You can check it out on my youtube channel @onthepegs
0 personas encontraron esto útil
Traducir reseña a Español
Traducido de Inglés
Ver original

Quien compró este articulo también compró