Reseñas de clientes para Extractor de miel eléctrico VEVOR, centrifugadora de miel de 4/8 cuadros, acero inoxidable, con soporte de altura ajustable y tapa.

Since we were new to bee keeping we didn't want to spend a lot of money on a higher end extractor. we didn't known if we were going to stick with bee keeping so getting something more affordable was why we went with this extractor. We purchased knowing that if we were going to keep moving forward with bee keeping that we would probably use this extrator one or two harvest seasons then move up to something bigger. This was easy to put together and did good for our first two seasons. I did figure out that that the metal isn't as high grade as other industry extractors. At the end of our first season cleanup from harvesting I didn't get the extractor completely dry and eneded up getting ow rust on it. It was easily cleaned up with Bar tenders friend compound. It did a great jo restoring the metal. It operated as expected. We have now purchased a bigger different brand extractor and ended up selling thr vevor to a new bee keeper who is going start bee keeping this year. It will serve them well. We have not regrets purchasing thr vevor extractor and would recommend it to anyone who's not sure how far into bee keep they want to go and trying to save some money.

Over all satisfied with the purchase. Easy to assemble and easy to move from one place to another, not heavy at all. Tried to extract 4 medium frames radially, but wasn't happy about the outcome. Too much of honey left in the frame. Then I tried extracting frames tangentially, putting frames parallel to the walls. Using this method you need to extract one side and then reverse the sides and extract again. So it is a bit time consuming. The other problem is the drain cap is about inch above the bottom, so get all the honey out you need to tilt the extractor which is a pain. Overall happy with the performance.

You can’t beat the price. It works good. Came dented but popped right out. Missing a screw for the safety switch. Just had to buy my own screw for it. But it works great and glad I purchased it

I purchased this Vevor 4/8 electric extractor as my first extractor, and was overall very pleased. Assembly is straightforward. The motor is quite quiet as is the full process when your spinning with some balance in the frame holder. If running out of balance try to minimize by inserting another frame(s) to reduce the mismatch. In these cases bolting down the legs would help. We had fun extracting 66.5 lbs from 14 frames, some deep and some medium or shallow. Ultimately placing either size in tangentially provided us the best results. Trying to spin the smaller frames radially didn’t work effectively for us. Clean up was relatively easy. The single piece frame holder has to be removed for a thorough cleaning and this can only be done by removing four nuts to remove the cover/motor assembly. That feature makes an economic design but is why I rated a four and not a five on features. After leaning the extractor on its side to pour all remaining honey through the honey valve we still spooned out another 1.5 lbs from inside before deciding to stop and clean. Overall, I recommend it.

Using it for my second season. So far so good. I have about 100 frames extracted at this point. Legs are a little weak but functional. Not a commercial unit but good enough for now.

Overall it’s a great product. Only set back on the design is the acorn nuts used to hold motor frame on the extractor drum . Really hard to line up the lovejoy coupling and get the bolts through motor bracket. Other than that . I used it to extract 20 gallons of honey in about 3 hours .

I happy with my purchase. I like that the bottom is concave so the honey is flowing to the outside. the drain out needs to be lower and the legs are wobbly. So I had to do some work on the legs and I still trying to make a plan for the drain. I suggest you use some lock tite on the screws so that they do not come off into your honey.

Decent product will get the job done. My only issue is the fact that the honey gate is not low enough to get all the honey out. You will of to get someone to help you tilt the extractor to get out the rest of the honey. Which is a Hassel. Other than that its a good product. I only use it once on my first extraction ever aa a new beekeeper. I Just started last year August. You can check me out youtube channel Starhub Adventures.

Makes extracting honey a lot easier. My other extractor is manual a considerably more work. It is light duty, but does the job.

Works and operates well for the money! Would recommend and or buy again! Vevor is my go to for all my tool needs!