Reseñas de clientes para Extractor de miel eléctrico VEVOR, centrifugadora de miel de 4/8 cuadros, acero inoxidable, con soporte de altura ajustable y tapa.

Wir sind im Ganzen zufrieden mit dem Honigschleuder. Es sind paar Beulen drauf. Anscheinend sind beim transportieren entstanden aber trotzdem wir sind zufrieden mit dem Preis und Lieferung und Kommunikation Wir werden auf jeden Fall weiter dort bestellen

Nice unit. Easy to put together. Price was good. Delivery time excellent. 6 frames extracted in 2 hours. Had to file legs edges as were very sharp. Overall a good unit.

Unit arrived as advertised in quick time and in new condition. Legs had sharp edges that were removed easily with a file. The extractor worked perfectly but I feel that the legs may fail over time if the unit is screwed down tight and the frames are out of balance. This is the only minor fault I have. Otherwise very good. Overall I am very happy with the extractor. My wife and I used it and it worked perfectly.

The parcel arrived securely packaged with no damage. The extractor was easy to assemble by following the instructions. Everything was included as per the instructions. Whilst we haven't used it yet, it looks like it will do the job required. Happy with our purchase!

Die Schleuder arbeitet insgesamt sehr gut und läuft zuverlässig. Die Verarbeitungsqualität kann jedoch nicht mit anderen Vevor-Produkten mithalten, die ich bisher hatte – hier hätte ich mehr Sorgfalt erwartet: • Die Kunststoffkanten am Deckel sind scharfkantig und müssten von mir alle entgratet werden. • Einige Schweißpunkte an den Befestigungspunkten der Beine ragen bis in den Schleuderraum hinein und erschweren durch Spitze Schweißperlen die Reinigung nach dem Schleudern. • Auch die Metallfüße sind sehr scharfkantig und könnten einen zusätzlichen Schutz vertragen. • Positiv: Die Schleuder läuft rund, sofern man sie sorgfältig einstellt und zentriert. Ist sie nicht gut ausgerichtet, neigt sie bei hoher Drehzahl zum „Wandern". Fazit: Funktional eine gute Schleuder, aber in Sachen Verarbeitung (Entgraten der Kanten, saubere Schweißnähte) deutlich unter dem Niveau anderer Vevor-Produkte. Daher nur 3 von 5 Sternen.

These extractors can’t take short/medium Manley frames in the radial extraction orientation. Dimensions aren’t included for the width of the radial ‘cage’. My Manley side bars are 41-42mm but cage is only 38-40mm depending on where you measure. this does not allow for any propolis buildup on the frames either. Due to this issue, I haven’t actually used the extractor yet but it seems solid enough and I can still use it in the Tangential orientation.

Bought this late July. Just used this for the first time today. Would not run unless I held the 2 door switch’s on so it would run. Ran for about 4 or 5 minutes and the power light went out. Stopped running. I beat on the switch plate w my knuckles and light came on. It went back to running,briefly. Kept having to bang on it to keep it running. Finally it quit altogether. Did not get all our frames spun. Very disappointed w this 260 dollar extractor. Should have bought a manual one. My wife is highly disappointed. Not a pleasant first time extraction and will loose our honey. I’m catching hell for trying to use this company product. 2nd purchase from VEVOR w the same results. They did refund me for the weed eater that never ran.

Werkt prima. Poten iets instabiel.

Used for 2 years with 1 hive, so not much use. Started this season Summer 2026 and 2 of the legs broke at the welds. I know the warranty is over but I contacted customer servive to see if I could buy 2 new legs or get a whole new set. 2 weeks go by and several non descriptive emails about how they are looking into it and finally an email saying "case closed" I never heard back and I dont have a machine that works properly. Customer service is horrible, up there with Comcast. I will never buy anything from this company again as the quality is poor if 2 welds break after 2 years of light use and they cannot even reply with a yes you can buy or a no, we cannot sell separate legs.

Pain in the butt to use unless you have perfect even frames. Frames are a tight fit ,new perfect frames easy but older frames a struggle. Not sure I know any beekeeper with perfect new frames. Does not spin fast enough to get all honey from frames even with endoing and running again. Maybe the manual one would be better . As a senior thought it would be easier but not really and not as good a job as our ancient manual So no I don't have a great review