Reseñas de clientes para Torno de metal compacto VEVOR, 20,3 x 35,5 cm, velocidad ajustable a 2250 RPM, 650 W de potencia, torno de ingeniería de precisión para metalurgia, ideal para trabajar diversos metales.

I purchased the MX 8x14 lathe because of the size and higher powered motor over the 7" options. The lathe needs a good cleaning and the gibs all need adjusting. Do use way oil to lube all the ways and ball oilers. The included motor/spindle belt is terrible and will break with little use. I changed mine out for a 470mm 5mm pitch 9mm wide standard belt and changed yhe motor pulley to a 17T 5mm pitch pulley. The motor shaft is 10mm. It arrived on good shape without any damage to the lathe or packaging. It wad packaged well in a wooden crate.

Nice little unit for hobbies. Options for cutting tools and end stock tools would have been nice but can purchase separately online.

Overall it is a really nice machine, however; it does not come with the 10 mm bolts to fasten the bottom tray.

Had it for almost a year now, and for the price it has done well. However it would have been nice to know before buying, that the lead screws are all in a metric pitch and won't cut SAE threads. Motor lacks power as well, has a tendency to stall out on single point threading.

Very good quality

Unit needed some adjustment at first along with adding some shims but overall , very strong and sturdy and surprised at the accuracy on the chuck.

This lathe is surprisingly capable, and the few things "wrong" with it respond well to a little cleaning, adjusting, tightening, etc. It's not really powerful, and although it turns aluminum and plastic without complaint, steel is a lot of work and aggressive cutting is not going to happen. Also, I don't make much use of the auto-feed; certainly not for thread-cutting, and only rarely for finish-quality feeding. The gears there are plastic, and I have not put them to the test in any way. Metal-gear kits are available, as are many other after-market mini-lathe accessories.

Needs a lot of work to get the tailstock lined up. Also some work in adjusting the carriage. Some chatter with mild steel. If you just need something to turn mild or soft metals down, this is good. It's not a 5k Jet lathe. It pretty good for what it is.

This lathe is a good buy for the money I did have to go over it and tweak it a bit and file some spots other than that it runs quiet and has great power..also the reason I bought it is because of the 1.5" spindle bore.. really enjoying this machine.

The price of this lathe is fair, the value for money is there. Ideal for beginners like me. Very basic instruction book, with very few explanations, but there are many videos on YouTube on this particular product. Poorly adjusted when it leaves the factory, you have to check all the tightening points and attachments of the carriages and also the tightening of all the gears, especially the motor drive shaft which tends to loosen, bringing noise and vibration into the machine. Before starting to turn, familiarize yourself with all the controls. I opted to buy extra metal gears to replace the original ones. When buying turning tools, you should know that this lathe is made to receive 1/2 pieces. (not mentioned anywhere). Be very careful with forward and reverse use, because you will burn the fuse, as I did. (there is only one spare). Capable of turning small parts with enough precision, ideally soft metals like Aluminum, brass or copper. Lacks strength if you have to drill threads from 3/8 -1/4. If you have to do threads with a turning tool, you will have to be patient because you have to change gears in the box and nothing is explained anywhere except on the cover of the machine very briefly. In general, we have fun with this lathe, Ideal for learning the basics.