Reseñas de clientes para Motor eléctrico VEVOR de 1.5 HP, 1725 rpm, CA 115 V/230 V, chasis 56C, motor compresor de aire monofásico, eje con chaveta de 5/8", rotación en sentido horario/antihorario para maquinaria agrícola y equipos generales.
1725 RPM 1.5 HP
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
133 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Chad Great motor
3450 RPM 1,0 HP
Put this motor on a wood lathe I built for turning bowls. Easy to wire. Plenty of power. Turned an 11 inch diameter platter with no bogging down at all.
0 personas encontraron esto útil
Traducir reseña a Español
Eric Home hobbyist
2.0HP
Motor is a great bargain for the price, work perfectly out of the box
Came wired as 120 needed to switch that over to 240. Not too hard to do but does need a little thought to get all the wires correct, directions or very easy to follow
0 personas encontraron esto útil
Traducir reseña a Español
roustabout bill Excellent powerhouse motor that can run on 220v or 110v.
1.5HP
This VEVOR 1.5 HP motor that runs at 3450 rpm was the perfect powerhouse for my 14-inch diamond- lapidary slicing saw. It was easy to mount, and the wiring installation was straight-forward and easy to connect with wire nuts with the only ding being the plug wire access punchouts. I had to remove the cover and drill the coin shaped plug out and grind the inner edges smooth- it was somewhat welded on, and you cannot hammer it out without bending the housing. Drilling worked fine and this is an excellent motor for my uses with no heating and smooth and steady cutting with no dragging whatsoever. As a replacement for a 1 hp motor- at 1725 rpm's- now I have plenty of power- no matter how hard the stone is that I am slicing, and the motor is somewhat quiet for this size motor. I have several other VEVOR motors and products, and they are all very well-made and function perfectly- worth the price! Excellent find!
0 personas encontraron esto útil
Rob Great 3 phase motor
3450 RPM 2,0 HP
Used on a lathe and it works great.
0 personas encontraron esto útil
Traducir reseña a Español
Tomlo Good motor
1725 RPM 2,0 HP
Use for my Cuttings machine very good
0 personas encontraron esto útil
John Engineer
1.5HP
Nice replacement motor for my dust collector. Easy to wire, stronger, and quieter than previous one.
0 personas encontraron esto útil
Traducir reseña a Español
Adam E. Canfield Works well for old table saw motor replacement
3450 RPM 1.5 HP
I was a bit hesitant to buy this after seeing the reviews, but I have been pleased with how it’s been working for me. I used it to replace my old delta unisaw motor on my table saw now for about a year or two and it has worked very well. I haven not had a single problem with it at all.
0 personas encontraron esto útil
Lenin Sanchez Work
1725 RPM 2,0 HP
A high-quality, precision item—in addition to its robust construction. 100% recommended.
0 personas encontraron esto útil
Jeff 3/4 hp electric motor
0.75HP
Works like it should, was shocked how fast it got here, it was packed well, knock outs could be stamped a little better it was like trying to get the government to do something , getting them out of the junction box , worth the money
0 personas encontraron esto útil
Gerardo Rivera Tough motor
0.75HP
Great motor gor the cost
0 personas encontraron esto útil
