Reseñas de clientes para Motor eléctrico VEVOR de 2 HP, 1725 rpm, CA 115 V/230 V, chasis de 143/5 T, compresor de aire monofásico, eje de chaveta de 7/8", rotación en sentido horario/antihorario para maquinaria agrícola y equipos generales.

Price was good. Way heavier than my old 3/4 hp motor. Can tell it is on my table saw. Knock outs in box to connect wires are not knockouts. Need to drill them out to wire it. Only used few times so can’t tell if it will last

Motor arrived quickly, and was very well packaged. I ordered the face mount version, and unfortunately it came with the foot mount also attached. In my application there wasn’t room for the foot mount and it was a big job removing it. Just to be clear no where in the literature did they say the foot mount would be eliminated. Cheers Chas

Well I ordered this motor to replace mine on a table saw. I am somewhat disappointed that the motor is, physically larger, but seems to work flawlessly. By it being a larger motor the belt guard doesn't fit any more but I'll deal with it as the motor has enough power to drive my saw.

Motor arrived several days after ordering, sooner than expected. Opened box and spun shaft, spun easy. Hooked up motor to an old drill press I’m working on. Motor has a slight vibration but not bad. Amps checked out good. Have only used a couple of times but seems to be worth the price for a motor that will only be used every once in a while.

We bought for our greenhouse per the contractor. When arrived it was the wrong size although the contractor said it was his fault. You also do not have the proper one to replace it. We have tried to contact you to return it with no avail. Everyone says your products are great, but not customer service.

what a waster motor not working

This was our 6th motor we purchased from Vevor. We had nothing but great luck with the previous 5. All the first 5 were 1725 rpm motors. The sixth one was a 3450 rpm motor. The motor had a high pitch squeal to it and over heated and shut down after about 5 minutes. We double checked to make sure it was wired to the diagram on the motor. We reached out several times to try and figure out what the problem was. Customer service never replied. So that being said we will no longer purchase anything from them in the future.

Has been in service on a gear box and screw pump for a year in an industrial environment. It’s very heavy and large for its hp but it’s survived thousands of on off cycles filling 5gal buckets with silicone.

I installed this as a 1000psi mist pump motor in AZ. I hit it really hard in a vented enclosure all day. It was running in a 140F environment at least. It did fail after like 8 hours of running. It burned out I'm not saying this is a totally horrible product, but the continuous duty rating it carries is not 100% accurate. I will have to buy a motor that is at least 2.5x the price for my need, but I thought I'd share my experience. I still LOVE VEVOR and this is still a quality product that may meet your requirements.

Après avoir fonctionné 4 fois la fumée est sortie du moteur et a arrêté de fonctionné.le technicien est retourné pour vérifier la connection et ma confirmé le moteur est défectueux