Reseñas de clientes para Sierra de cinta VEVOR con soporte, 9,65 pulgadas, 560 y 1100 RPM, sierra de cinta de sobremesa de dos velocidades, motor de 370 W y 1/2 HP, altura de corte de 6'', longitud de hoja de sierra de 72,13'', con guía y calibre de inglete, para carpintería, aluminio y plástico.

Estamos muy contentos con ella

There was a part on my saw that was broken when I opened it out of the shipping crate, and the company sent me a replacement part that was lost in the mail and they refunded my money. Good company that treats their customers right. I bought several tools from them and I have not had any problems with them at all. The only thing I can complain about is the instructions were not very explicit and could be improved.

Ottima sega a nastro. Robusta,motore potente, taglia legni duri come burro.precisa.ottima la luce di cortesia

This was a beautiful addition to our shop. We couldn’t buy the blades online, but had to order them special. The only thing we wish is that you could order the replacement blades from VEVOR. Thanks!

Its a well-built bandsaw, easy to change blades with the quick-release handle. I've been needing a deep-depth saw and know I have one, a 13-inch cut! I'm very pleased with it.

The machine fulfils its purpose. I wish it could have extra thickness blades, in order to achieve different types of cuts.

It works so far. I am kind of cautions on Vevor stuff now. Few things came up not working. Do not want to links this one. If something does not work vevor makes you jump through a lot of hoops, like : you have to upload a video, but then the app crusges!. And then they close your claim! Do i have enough characters now?

Go ahead and buy this 14" bandsaw. It looks really nice and cuts really well. One thing to mention is that I've immediately changed the 1/2" blade that comes with it. I had problems cutting straight or even following curves line with it. I ordered two blades one 1/4 " and 3/4 " both 109.25" long from Cyber Woodworking Depot. What a difference. Both cut straight lines and the 1/4" one cuts curves really well. You don't need the guiding bearings for cutting straight lines, just you to know. It makes absolutely no difference with or without them. When you cut curves you do need them to prevent the torque of the blade. Another nice thing about this saw is that it has an excitation motor. If you cut light things the power is around 5 to 600 hundred watts, but once you resaw thick wood than the power kicks in around 1250 Watts, which is exactly what they say in the ad about 1.5HP motor. Trust me I did measure it myself out of curiosity. A worthy procedure to mention in here. When you tension your blade just make sure you first apply the quick release shaft and after that use the tension pan on top of the machine to screw and increase it more. Don't do it backwards because it can bend the brackets groove that holds the entire mechanism and your blade guard that raises up and down will hit the upper wheel after that. If you need to adjust the blade on the lower wheel to be right in the center of it there are 4 screws in the back of the machine. First release tension on the blade and loosen the nuts but don't unscrew the bolts. Just enough to give a tiny room for the other one to push from the opposite direction. Do very small turns like a quarter arc at the time. Top and bottom screws are for that. To turn the blade left and right the other ones. Basically you don't have to touch them, but just in case the wheel is off from factory you know where to go. Everything is adjustable and workable, don't worry about a thing plus the customer service is prompt and helpful with no reserve. Very useful machine to have in your atelier and the price very competitive.

This bandsaw is phenomenal - it came via Freight shipping in a very durable crate so it was well protected and the bandsaw came nearly fully assembled, the onle assembly required was assembling the storage cabinet base and installing the table. The bandsaw has every feature of the $2000+ bandsaws and has plenty of power. We put a 3/4" bi-metal blade on it and it cut through everything we tested it with. We could not find any off-the-shelf blades in the correct length, but we ordered custom blades from BandSawBladesDirect.com and they fit perfectly. Best Vevor purchase to date!

machine expédié sans notice en français