Reseñas de clientes para Taladro magnético VEVOR, motor de 1450 W, diámetro de perforación de 1,6 pulgadas, taladro de columna magnético portátil de 2810 lbf, con 11 brocas de perforación, velocidad de 850 RPM, máquina de perforación para superficies metálicas, industria de mejoras para el hogar

Very well packaged Great service Really good tool

This is my first AND LAST VEVOR product. I purchased the 1550W Mag Drill for a friend of mine who operates a machine and welding shop. He was working on a project for me and it required a mag drill which he did not have. I suggested purchasing a mag drill for him in exchange for his services and he happily agreed. The purchase experience was fine and the drill arrived on schedule and in good condition. It was well packaged. However, that was the only good part of this entire, horrible experience. When we attempted to use the drill to our dismay NONE OF THE ELEVEN boring bits supplied with the drill would fit into the drill chuck. The shank on every one of the eleven bits was too large and would not fit into the drill chuck at all. We purchased good quality boring bits from a local machine shop and they fitted the drill chuck precisely. Now for the really horrible part of the experience. I contacted VEVOR customer support and requested a return authorization for the boring bits and a replacement set. They refused to accommodate my request and instead gave me the royal run around saying their tech support people needed video and photos of the "problem". After fighting with them for several weeks repeatedly asking for a replacement set of boring bits they still refused to send me a replacement and instead offered my a (get this) $32.00 payment. The drill itself worked fine which is the only reason I rated it a 3 overall. The boring bits supplied with the drill were obviously poor quality, cheap bits and totally worthless. Like I said at the beginning of this review. This is my first and last VEVOR product purchase.

Overall it's ok for the money but there's definitely more to be desired. The magnet isn't very strong and drill tends to lift easily when applying pressure to cutter. It doesn't have a quick release for changing cutters which is rather inconvenient. Also with the variable speed it loses power as you turn down speed compared to other drills with a 2 speed gearbox.

The magnet isn't very strong it does not hold the steel well when you're trying to drill. The drill comes off of the metal once you apply pressure to the bit.

It came damaged. We talked to somebody via email about sending us the part and I could fix it but they haven't gotten back to me so I'm stuck in limbo

I was excited to put the tool to use but was very disappointed with the handles. The threads appear to be too small for the handles and the handles appear to be cross threaded as it it was a return product and sent to me. Plus it's some wear on the paint like it was used or something. I have pictures and videos

Cannot use regular twist drill bits, the travel will not allow it, a 1/2 inch bit touches my welding table with drill at the highest point. It came well packaged, I will know better next time.

Does ok, doubt it will last. Just cheap no good. Vevor is the worst to deal with. Head moves side to side a lot. Would be half ok if you got more bits for the cheaper prices

While it is all right for DIY not robust enough for industrial work which is what i needed it for so overall its ok for small jobs but not good enough for heavy duty work Pity because i buy quite alot of vevor tools You need to make them more robust and appealing to heavy duty industry To compete with the top brands

The fitting drill vs spindle was so tight that it is really hard to mount the drill's. Furthermore the chuck adapter didn't even fit. -Comment - We have confirmed that each spindle is tested before leaving the factory, and only those within the standard range are shipped. If you cannot provide a video of the spindle measurement, we cannot make a judgment at this time. Please try using sandpaper to mark the inside of the spindle to enlarge the inner bore. -Hey, the manufacturer should have fine polished the inside. I think i have to sandpaper down the chuck adapter to make it even go in, phew. Not satisfied at all.