Reseñas de clientes para VEVOR Tanque de presión de pintura en aerosol de 10 l/2,5 gal, olla de presión máxima de pintura de aire de 70 PSI, estante de metal y sellador de reparación de fugas para la industria, decoración del hogar, arquitectura, construcción, pintura automotriz

Converted this pressure pot for resin casting and after a week of buying the wrong connectors I was finally able to use my car tire inflator to pressurize the pot. A small jump start/tire inflator battery can get about 30psi before dying out. After a 12hr period my pressure dropped about 2-4psi. I was able to get the psi up to 40 before the dice fully cured. Everything worked out perfectly despite the tiny leak.

All very good.

I bought the pressure pot purely for my hobby of epoxy and wood turning. However the paint pick up tube was in the way of putting items in the pot and it required that I remove it, would have been nice to just be able to unscrew it and get it out of the way. The pot initially leaked air at a couple of fittings but I was able to remedy that. Overall I am pleased with the pot and have now used it several times since receiving it. Delivery was prompt and I would recommend the item to others.

Grundsätzlich ist der Topf top. Jedoch hat er innen eine stange welche die arbeit mit Resin etwas mühsam macht. Leider gibt es keine möglichkeit die zu entfernen. Weshalb ich bei höheren Resin dingen eher davon abraten würde. Wenn man das rohr abnehmen könnte wäre er perfekt. Wir wollen die verlängerung jedoch nicht Gewaltsam entfernen aus sicherheitshründen. Also atbeiten wir bestmöglich rund herum

Dear Vevor team, This is to inform you that I recently bought one of your paint sprayer, a 10 litre pressure paint pot feed spray gun 1.5mm Nozzle Paint sprayer for 10 litter capacity painting. My doubt is, do I use it with an air compressor? If not, how can the paint pot feed build pressure inside the tank that release the spray. Counting to hear from you anytime soon. Regards, Edward Wilson

Très très bien je recommande Au début du mal l apprivoiser Du bon travail pour le prix Très bon rapport qualité prix

Nog niet in gebruik maar ziet er goed uit

The product is good except that needs some improvements. The two transparent pipes are to stiff and get curled easily thus making it difficult sometimes to handle. There should be a pipe extension connected to the straight pipe in the tank so as not to have left over paint which cannot be sprayed out and also to have a mesh filter. The rest is fine

Bought this with the intent to spray water based finish. I didn't bother using the guns or hoses that came with it. Pressure pot itself seems durable

Un produit qui aide bien lorsque l'on filtre la peinture ! OU Alors il faut nettoyer le nez du pistolet sans arrêt !!! Donc Filtrer la peinture avant de la mettre dans l'appareil pour peindre !