Reseñas de clientes para Lijadora de banda VEVOR, pulidora de banda de velocidad variable de 30 x 1 pulgada con VFD, pulidora de 550 W con 2 moldes de pulido y 3 bandas de lijado para metalurgia y fabricación de cuchillos.

This one is a good addition to any shop,knife maker, or blacksmith. Easy to change belts or attachments. It needs a holder for the Allen wrench to change accessories and it also needs a bigger work table. The VFD will read HZ and not RPM no manual to explain the VFD but you get to know it with use. Some of the welds is a little bit questionable but holding for now if they need it later I will welds them then.

Braucht noch etwas Fein Tuning. Die Bandspannung ist etwas zu hoch und es ist nicht alles im Winkel (eher Kosmetik) . Trotzdem perfekt fürs Geld.

Der Bandschleifer ist solide gebaut, funktioniert einwandfrei, die 25mm Bandbreite sind halt limitierten und bei mehr Druck /längerem Schleifen wird die Führungsplatte / Anlage des Bandes recht schnell heiß. Ich hab mir eine Hitzeschutzfolie auf die Anlage geschraubt, damit geht s gut. Für meine (Hobby) Zwecke bisher gut.

Ottimo prodotto

Zum Messerschleifen und ausdünnen ganz ok

This 2 x 72 belt sander is a solid machine for the price. Tolerances are a bit loose so I had to do a little shiming here and there to get things square. I wish it had a secondary tool arm so I could use or build a surfacing attachment, a better table and sharpening jig. The table it comes with is not great. Outside of that its has a good motor and tracks pretty good. It worth the price for the most part.

One of its kind at the market right now, good for small tasks, has enough power. Just a little too small for knife-making and the work-bench included could be bigger and more secure/easier to set angles and keep straight. Haven't used the wheel, it looks good but maybe too small to be useful in knife making. For the price is very cool but for my case ,will probably end up going to a bigger one when I can.

Ive been interested in getting into the knife making hobby so I bought the 1x30 machine to see if the hobby was for me. This 1x30 machine has many of the same features as the larger pro machines for a fraction of the cost or the size (I have a small shop). It’s obvious to me that it’s too small for serious knife makers, but I love it!, and will use it, and my old 2x42, until I outgrow them, then upgrade to the vevor 2x72. When I do upgrade, this little guy will be my primary knife sharpener. Very happy with this purchase.

I've been sharpening knives for four years now. I have two other 1X30 machines, one is a Harbor Freight with a modified DC motor, controller and belt wheels, the other is a RIKON with variable speed motor that runs very warm if used at low speed for more than 20 minutes. The Harbor Freight tool is okay, a bit noisy, overall construction is very cheap too. This VEVOR tool checks all the boxes the other tools are missing. Very sturdy construction, very quiet, variable speed motor control is very smooth, easy to use, with a reverse direction, belt changes are very easy too. The VEVOR tool can be used horizontally or vertically too. The only fault with this tool is the tracking wheel is very sensitive and can be difficult to keep belts centered while in use. I purchased a aftermarket replacement for the tracking wheel, very easy to change, problem solved! If your into using 1X30's for knife sharpening, this is the best. I'm buying another one.

Super nice little belt grinder. Great price. The variable speed control is fantastic. Replacement belts are very affordable