Reseñas de clientes para Herramienta pelacables eléctrica VEVOR, pelacables motorizado de 0,06''-0,98'', 60 W, con medidor de profundidad transparente, 6 canales circulares y 1 plano para un reciclaje eficiente de cables de cobre.

Le moteur ne fonctionne pas et le service méditer remboursé

Very surprised and disappointed at lack of quality check of unit before packing and shipping. Unit came partially assembled, Black plastic handle was already attached to metal handle arm which should attach to main body. Main body comes with a black metal D-shaft section (drive flat section) so as to attach the handle arm securely. The handle arm does not come with a corresponding D shaped hole in the arm,this would have improved its build quality. When trying to attach the handle arm to the shaft, it was noticed that the threaded pilot hole for the M8*12 hexagon screw (item 6 page 5) was not in the correct position on the arm. The M8 threaded hole appears to have been incorrectly installed at the wrong end of the handle arm next to the black plastic cylindrical handle. This has made the unit inoperable unless, we drill and tap the handle arm ourselves or replace the handle arm with an arm incorporating a D-shaft slot and M8 threaded locking screw hole. When you purchase a piece of equipment, we would normally expect to be able to use it fairly quickly once bolted and screwed together. In this situation, unit is unusable until handle issues are resolved.

0.05” wire (16 ga) wire it claims to do,.. witch is why I choose this single wheel model. And let me tell you personally it does not work

Bonjour, j'ai reçu ma commande aujourd'hui mais la molette en plastique de réglage est cassée... Je suis un peu déçu. Merci de me faire parvenir une pièce de remplacement. Cordialement.

This machine is useless to me because it will not cut the wire that I feed it.Ineed to get this machine working correctly the blades are centered and the electic motor runs will you help me get it running or can you replace it?

Purtroppo non mi soddisfa

Sunflow I'm being forced to review something. I haven't had the opportunity to use yet. I don't know how easy it is. I don't know anything about it. Maybe when I get a chance to use it might get a review. But also might not, I may not ever use V bore ever again.

Over Priced Time Saving, yet Time Consuming

The blades and gears are not aligned properly and have been a pain to try and realign. After stripping a about 2500' of #10 it has gotten worse. I owned the previous model a few years ago and had much better results with it.

The product itself is good but shipping was a hassle. Due to the weight, Purolator refused to deliver it to the door even after two calls where they assured me they would. I notified a representative at Vevor as well which didn’t help. Had to take my time to pick it up myself from the Purolator depot.