Reseñas de clientes para VEVOR Prensa de Calor 16x20, Máquina de Prensa de Calor de Potencia de 1700 W, Calentamiento Rápido, Máquina de Prensa de Calor de Alta Presión para Camisetas, Impresora de Sublimación Industrial Digital para Vinilo de Transferencia de Calor, Fácil de Usar, Negro

At first glance, the heat press looks quite good. Upon closer inspection, there are some minor construction and build-quality issues, but considering the low price, this is somewhat understandable. In fact, I expected the machine to feel cheaper and use worse materials than it actually does. My main concern is the actual operation of the press. It requires some adjustment and testing at home before you can achieve consistent results. This is definitely not a machine that you simply unpack and immediately start using with perfect results. The biggest issue is uneven heat distribution across the heating plate. With the press set to 150°C, I measured approximately 148–150°C in the upper part of the pressing area. In the center, the difference was smaller, with temperatures averaging around 145°C. However, the biggest problem was in both lower corners, where I measured only around 128–132°C while the machine was set to 150°C. This is a significant temperature difference, so you need to experiment and find settings that work for your particular machine and application. Another issue was uneven pressure. On my unit, the lower-left corner did not apply enough pressure compared to the rest of the pressing area. Overall, you need to spend some time learning how to work with this press and adjusting your process around its limitations. For a beginner, it can be a reasonable entry-level machine, especially considering the price. However, knowing what I know now, I would probably not buy it again. I would rather look for a higher-quality second-hand professional heat press. One positive point is the 38 × 38 cm pressing area, which is a very useful size for beginners. Unfortunately, because the machine does not heat and press evenly across the entire surface, you cannot always take full advantage of that area.

No cumple con mis expectativas porque no es deslizante, por lo tanto incomoda para colocar las prendas. La utilizo en mi negocio y hago muchas camisetas, sudaderas etc.

J’ai reçu la machine mais je crois qui ya un problème jais des fils qui son sorti et qui son pas brancher

Not happy with the product

My husband purchased a wire stripper and was satisfied with the product. I decided to try ordering this heat press. While heating up quickly, the description states it will heat to over 480 degrees, and the one I purchased will not hear past about 385 degrees. The temps fluctuates all over the place, dropping quickly to a much lower temp and then not heating to the set temperature. I am not happy with the device at all and will be returning to purchase elsewhere.

El usuario no dejó ningún comentario escrito.

DO NOT BUY VEVOR. Came dented and cracked even tho packaging had no damage. it was purposefully boxed up damaged and sent out. Paid for the insurance, that covers nothing! Customer service is not helpful. Expecting Customer to ship and/or repair the machines themselves is absolutely absurd. I was offered to pay to ship it back and wait for them to decide if I will be refunded or contact tech support to get new parts shipped for me to replace myself. Voiding any and all warranty on the equipment. Wish I would have saved my $300 bucks and stuck with my press from temu that cost me $45 and has last 4 years. I have nothing good to say about this company. IF an actual resolution is reached I will update this. But until then I will be making sure everyone knows how terrible this has been.

Not working as it should! It is about 40 Celsius degrees (100F degrees) lower than displayed. Had to ruin my tshirts and designs until I figured out what is the issue

Heat Press wouldn't maintain a steady temp right out of the box. Fluctuated 20 degrees up and down. Their solution was to give me a 50.00 credit and keep the press.

Wir haben eine Wärmepresse gekauft und die ist für uns aus unterschiedlichen Gründen nicht geeignet. Wir versuchen seid 11 Tagen über den Kundenservice die Presse zurück zu geben. Der Kundenservice meldet sich mit KI / Standartanworten zurück. Der Kundenservice gibt uns keine Antwort wohin wir die Ware zurück senden können, damit wir unser Geld zurück erhalten! Dieser Kundenservice ist nicht zu empfehlen!