Reseñas de clientes para VEVOR Prensa de Calor 16x20, Máquina de Prensa de Calor de Potencia de 1700 W, Calentamiento Rápido, Máquina de Prensa de Calor de Alta Presión para Camisetas, Impresora de Sublimación Industrial Digital para Vinilo de Transferencia de Calor, Fácil de Usar, Negro

Bought this as an upgrade to my smaller press. It is built pretty good but at some point the top became slightly off center from the bottom and then out of no where the other day it just died, fuse is good and the power supply looks fine. I haven't disassembled it yet to see if there is an obvious problem. I use this fairly lightly.. maybe once or twice a month for a couple hours. Disappointing that its dead in just a year and 4 months time.

Mine arrived and it was packaged really well. It was undamaged. I am a casual user at this time and am using it to adhere leather to an adhesive material for making hat patches mostly. I will be using it for transfers but not in an industrial type setting. I used an infrared thermometer to see how even the heat was over the entirety of the platten. Mine has a 30º difference from the right (hot) side to the left(30º colder) side. This would be unacceptable for most users and I am honestly not happy about it not heating evenly. For users who want a more even heating element, maybe look at some other options. For the cost of admission I didn't expect much so at least I have a way to adhere leather to some adhesive materials.

Good Until It Just Stopped Working... I've Had This Press For A Little Over A Year and Went To Turn On To Press Orders and It Doesn't Work. NOT A Peep When You Turn It On. I get things wear out on them, but it should have lasted longer than 1yr.

Pers is niet draaibaar vandaar niet makkelijk te gebruiken omdat shirts etc moeilijk op de plaat te leggen zijn in d ejuiste positie zonder je handen te branden aan de bovenplaat. The press is not swivel, which makes it difficult to use, as shirts and similar items are hard to position correctly on the platen without burning your hands on the upper plate.

Received one but it was the wrong size. Cut me a deal and I kept it. Bought the 24x16 and found when using a infra red camera that the heat on the platten was drastically out of wack. 29 degrees lower in some points and a very odd shape to the heating . Vevor did send me a new control panel to see it it works.

The bonus point system sucks!

La machine est arrivée déformé sur un côté Et je n'arrive pas a vous joindre les images

rec’d my Vevor heat press…. Set it up the next day…. And w/in 2 days the timer stopped working….so I’ve had to set a manual timer when using this heat press….definitely not what I was expecting out of a brand new heat press!!

Cute colour, the plate doesn’t heat Evenly though. Tested it out with a heat gun and the top two corners are about 10 degrees over what’s set. The middle is about 25 degrees UNDER, and the back corners are about 40 degrees under what’s set. This makes it really hard to get good results but otherwise not too bad. I dislike how it doesn’t have a pop up feature and you have to yank it with all your force back up

The price is pretty good for what it is; however the machine has a hard time keeping the temp. It’s constantly beeping at me with an error on the screen and the temp seems to raise and lower with the error. Sometimes it gets fixed by turning it off and back on. Sometimes it comes on within the first 5 mins of the machine being in, and sometimes it doesn’t come on until I’ve been using it for 30 or 45 mins. The tray that slides out gets greased up and gets on the shirts I’m pressing. The pressure is almost non existent around the edges. But it essentially gets the job done still, unless I have a larger print to press and then it’s a pain.