Reseñas de clientes para VEVOR Prensa de Calor 16x24, Máquina de Prensa de Calor de Potencia de 1700 W, Calentamiento Rápido, Máquina de Prensa de Calor de Alta Presión para Camisetas, Impresora de Sublimación Industrial Digital para Vinilo de Transferencia de Calor, Fácil de Usar, Negro

The bonus point system sucks!

La machine est arrivée déformé sur un côté Et je n'arrive pas a vous joindre les images

Don't buy only lasted 6 months. Blew out in the midst of a project.

Cute colour, the plate doesn’t heat Evenly though. Tested it out with a heat gun and the top two corners are about 10 degrees over what’s set. The middle is about 25 degrees UNDER, and the back corners are about 40 degrees under what’s set. This makes it really hard to get good results but otherwise not too bad. I dislike how it doesn’t have a pop up feature and you have to yank it with all your force back up

The price is pretty good for what it is; however the machine has a hard time keeping the temp. It’s constantly beeping at me with an error on the screen and the temp seems to raise and lower with the error. Sometimes it gets fixed by turning it off and back on. Sometimes it comes on within the first 5 mins of the machine being in, and sometimes it doesn’t come on until I’ve been using it for 30 or 45 mins. The tray that slides out gets greased up and gets on the shirts I’m pressing. The pressure is almost non existent around the edges. But it essentially gets the job done still, unless I have a larger print to press and then it’s a pain.

The description lied. It does not go up to 570F, it only goes to 450F. This was not good because I was trying to use it for a application outside of t-shirts.

To start with, this heat press worked great, held temperature and my projects were turning out pretty good. After a couple of months though, temperature would drop allot after closing it and wouldn’t reach target temp before timer was up. Adjustments to time and temperature to try to compensate for the temp drop but that didn’t help. I submitted the video that was required to ask for help and explained the problems I was having. After going back and forth messaging, they told me they would be sending a new thermocouple. Needless to say the wire they sent came with no instructions on how to change it out. I did manage to get it done but things didn’t improve any. I guess I should have bought something more expensive but I liked the design of this one. I’ll write this off as a huge mistake and probably won’t be buying from Vevor again. Customer service makes it difficult to even file a complaint by asking for a video and then limiting file size and format and only one can be added.

Currently UNABLE to use my BRAND NEW product because the press WILL NOT fully close!!!! Have contacted customer service about receiving a replacement (which is preferred) or a refund and they take forever to respond 😞. The problem IS NOT as simple as “turning the handwheel” which is what I was told to do from the customer service rep.

Ma rog de 2 săptămâni sa returnez produsul, este sigilat nici nu l-am folosit și nu dau de Nike i pentru returnarea lui, scrie retur gratuit în 30 de zile, dar nu se ocupa nimic, deplorabil

I am filing a claim regarding my Vevor Heat Press due to ongoing mechanical and heating issues that have made the machine difficult and unsafe to operate. The heat press is no longer reaching the desired temperature consistently. During operation, the machine begins beeping and fails to maintain or achieve the selected heat setting. This issue has continued despite multiple attempts to operate the equipment properly. Additionally, the handle has become excessively difficult to open, requiring an abnormal amount of force. The pressure adjustment knob is also stuck and cannot be turned to adjust or release pressure as intended. These problems have significantly affected the usability and functionality of the machine and may indicate internal mechanical or electrical failure. I am requesting inspection, repair, or replacement coverage under my insurance policy.