Reseñas de clientes para VEVOR Prensa de Calor 16x24, Máquina de Prensa de Calor de Potencia de 1700 W, Calentamiento Rápido, Máquina de Prensa de Calor de Alta Presión para Camisetas, Impresora de Sublimación Industrial Digital para Vinilo de Transferencia de Calor, Fácil de Usar, Negro

Received one but it was the wrong size. Cut me a deal and I kept it. Bought the 24x16 and found when using a infra red camera that the heat on the platten was drastically out of wack. 29 degrees lower in some points and a very odd shape to the heating . Vevor did send me a new control panel to see it it works.

rec’d my Vevor heat press…. Set it up the next day…. And w/in 2 days the timer stopped working….so I’ve had to set a manual timer when using this heat press….definitely not what I was expecting out of a brand new heat press!!

Due to the delayed delivery by Purolator, I received the unit much later than expected. I have not found time to test it.

It stopped working after a few months. It’s hard to speak to a representative. So far only able to chat and it’s a never ending chat with no solution

At first glance, the heat press looks quite good. Upon closer inspection, there are some minor construction and build-quality issues, but considering the low price, this is somewhat understandable. In fact, I expected the machine to feel cheaper and use worse materials than it actually does. My main concern is the actual operation of the press. It requires some adjustment and testing at home before you can achieve consistent results. This is definitely not a machine that you simply unpack and immediately start using with perfect results. The biggest issue is uneven heat distribution across the heating plate. With the press set to 150°C, I measured approximately 148–150°C in the upper part of the pressing area. In the center, the difference was smaller, with temperatures averaging around 145°C. However, the biggest problem was in both lower corners, where I measured only around 128–132°C while the machine was set to 150°C. This is a significant temperature difference, so you need to experiment and find settings that work for your particular machine and application. Another issue was uneven pressure. On my unit, the lower-left corner did not apply enough pressure compared to the rest of the pressing area. Overall, you need to spend some time learning how to work with this press and adjusting your process around its limitations. For a beginner, it can be a reasonable entry-level machine, especially considering the price. However, knowing what I know now, I would probably not buy it again. I would rather look for a higher-quality second-hand professional heat press. One positive point is the 38 × 38 cm pressing area, which is a very useful size for beginners. Unfortunately, because the machine does not heat and press evenly across the entire surface, you cannot always take full advantage of that area.

Bought for my wife to replace a previous unit for which Vevor do not hold replacement parts. On unpacking found damage to one corner of the unit but internal packaging showed no signs of damage. Eventually came to an agreement with Vevor that I would accept compensation for the damage. Not impredded with the refusal to replace a damaged item and having to fight for a decent level of compensation. I like and continue to buy Vevor products but their customer support sucks big time.

I am trying to work out a problem through customer service,,,it is a slow go...my images are light on the top part of the product that I am pressing...husband checked to see if pressure plate was balance leaving us to believe the heating element is not performing correctly...this is sublimation pressing....latest message is that it will take 1 to 2 business days to get back to me. I've ruined a few products so far!

Good Until It Just Stopped Working... I've Had This Press For A Little Over A Year and Went To Turn On To Press Orders and It Doesn't Work. NOT A Peep When You Turn It On. I get things wear out on them, but it should have lasted longer than 1yr.

Pers is niet draaibaar vandaar niet makkelijk te gebruiken omdat shirts etc moeilijk op de plaat te leggen zijn in d ejuiste positie zonder je handen te branden aan de bovenplaat. The press is not swivel, which makes it difficult to use, as shirts and similar items are hard to position correctly on the platen without burning your hands on the upper plate.

The craftsmanship is really good, strong and sturdy. But not having a slide out on this machine kills it for me. Unfortunately I didn't pay enough attention when purchasing. The clam shell design leaves you with limited working space when trying go maneuver your shirts/ apparel.