Reseñas de clientes para Herramienta pelacables eléctrica VEVOR, pelacables motorizado de 0,06''-1,18'', 180 W, 18 m/min, con medidor de profundidad transparente, ideal para reciclar chatarra de cobre.

Works as it should a little bit of getting use to it though

Works amazing fo wires 6 awg and bigger. 8 awg can work but needs fairly fine accurate adjustment. anything smaller while can be done takes too much time to line up and set up to get perfect since the wire is so small compared to the wheel.

Bon Rapport qualité prix. Recommande. Facile a utiliser et fonctionne bien. Très bien emballer pour la livraison.

The stripper works great for stiff insulated wire but not so great on soft insulated wire. I have used this stripper every weekend for almost a year and it is mechanicaly sound and still going strong. I highly recommend this stripper if you want a quality built priduct at a great price.

The wire stripper strips big wires just fine but will not strip small wires very well at all. It keeps kicking them out to the side. This is aggravating especially when you have tons of them to do and you have to do them with a manual machine instead of electric wire stripper

Needs more options for wire guide holes only comes with 2 choices need one for 3 ott wire I think it’s called wire guide it’s where you feed the wire into the stripper

Works great for larger diameter wires anything small like a pencil lead it’s hard to cut it. If you fiddle with it it does cut but it cuts the other stuff pretty good I ever need another one. I’ll definitely buy it.

Good little machine. It does a good job. The only small complaint is that it does have a little trouble keeping the wire in place on the splitter and wheel guide sometimes. Overall, this is a great investment!

Unit is ok. Problem is have a small bend in wire and doesn't strip well at all......................

Overall it does what it's suppose to do. The motor turns the drive which pushes the copper underneath the cutting wheel. For some reason the wheel that moves the copper under the cutting wheel is crooked or off centered and it pushes the copper to one side and doesn't cut it or it gets stuck. Also as it moves it makes a weird sound like it's possibly misshapen. Also on the knob that you turn to adjust the depth of the cutting wheel when you add more depth the bottom of it will end up touching the cutting wheel as it's turning which nicks the blade or makes it dull. It did come with a second cutting wheel that seems to be sharper.