Reseñas de clientes para Crimpadora de tubos inalámbrica profesional VEVOR de 18 V, apta para tubos de acero inoxidable, cobre y PEX de 1/2" a 2", con giro de 360°, motor sin escobillas e incluye 6 mordazas de crimpado.

My tool works fine, I have sent in several requests asking about HVAC heads for it. A little disappointed in customer service

I've only pressed 1 job in with this tool and it performed well. The jaws are a are definitely decent and are an all but copy of Milwaukee jaws. It really boils down to how long will it effectively last. So basically if your just starting your business this would be a be a good starter

Lighter weight than other brands, Power is still there! The shoulder strap is a game changer when you are moving with a ladder. I call it the handicap propress!!! Its awesome!!

Works great, a little bit heavy. Comes with 2 batteries, charger and presses from 1/2" to 2". It also has a counter on the tool to tell how many times it has been used. So far so good.

Awesome tool, the only flaw is the 1/2" jaw, it presses the inner ring of the fitting but not the outer ring.

I’ve used quite a few press tools and this has pros and cons. It’s actually quieter than my Ridgid 240. If I would have known how long it was, I probably would’ve passed on it. It’s big. And heavy. You won’t fit it sideways between floor joist while pressing. You’ll have to build some things down below and press then in lower than the joist. But. I do like the counter on the machine itself. I have around 80 crimps on it and seems to hold up well. Again. If you’re looking for a light press tools this isn’t it. I’m not sure I got the complete hang of it yet.. but I don’t think there’s a “off” button. The button you make the cycle with is the power button. If you long press it, it obviously makes a crimp. The jaws seem to open easier that my Milwaukee or Ridgid jaws I have. Whether that’s the quality or the spring is lighter, I’m not sure. Would definitely have 5 stars if it was a tad bit lighter and shorter.

Our company has one of the more expensive brands and ordered this one as a secondary after reading the other reviews. We had occasion to use both on the same job and here's my take. Performance was nearly identical. Vevor's press operation takes about 1/2a second longer but quality of press appears identical. Vevor is about 1/4 pound heavier which only becomes noticeable after numerous presses, especially over head. The product is definitely made from quality material and very well made. The heads are interchangeable with the other brand and press equally as well on either unit. For the price we are satisfied and only time will tell regarding durability and dependability. I would love for Vevor to manufacture the pivoting press ring set at a more affordable price.

It works as advertised, a little slower than my rigid and sounds a little more clunky but I’ve tested it well and fitting hold past 250psi so I’m happy with it I’ve already used it up to 11/2” next job it will have paid itself off.

This unit arrived in a sturdy plastic container that contained all the press heads,batteries,and chargers. I have used the Ridgid and Milwaukee press tools and compared to those tools it does a really great job for the price comparison. This tool takes a little longer to make a press compared to top brands but we are talking a second or two which is not much. The unit is pretty long and does not have a swivel head so it is hard to get into some places this means that you may have to pre-plan some of your presses. I have not tried all of the press heads yet, but I have a feeling that they will all work the same way the reason why purchased this unit was because of the price time will tell on how long this unit will last

I bought this unit as a back up. It seems to work good. The only thing I don’t like is very loud almost sounds like it’s breaking something when you’re using it but I have not had a problem with it making water tight joints. As aside note the jaws fit into a Milwaukee m18 press. Which makes this roll well worth the money.