Reseñas de clientes para VEVOR Torno de metal, mini torno 210x800, cambio de velocidad variable de 2500 RPM, mini torno de precisión de 850 W, torno para trabajar metales con motor sin escobillas, fresadora para varios tornea
211x800 mm 850 W
Opiniones de los Clientes
Cómo funcionan las reseñas y calificaciones de los clientes
Las reseñas de los clientes, incluidas las calificaciones con estrellas de los productos, ayudan a los clientes a obtener más información sobre el producto y a decidir si es el producto adecuado para ellos.
Nuestra calificación general no es un simple promedio. Priorizamos las reseñas auténticas y confiables, y filtramos los duplicados o el contenido inválido antes de calcular la puntuación final. Esto garantiza que la calificación refleje fielmente las experiencias reales de los clientes.
Reseña este producto
Comparte tu opinión con otros clientes.
Escribe una reseña
106 Reseñas
Reseñas del Artículo Actual
Compra verificada
Solo fotos y videos
Traducir todas las reseñas a Español
Marcus Dale Vevor lathe regret
203x356 mm 650 W
Crate was broken, loose nuts in the crate that I can't figure out where they go. Very noisy motor. It's cheaply made, poor quality materials, likely to last a short time.
3 personas encontraron esto útil
Traducir reseña a Español
Josiah Hobby
203x356 mm 650 W
It is garbage everything is loose and nothing is Evan remotely accurate
1 personas encontraron esto útil
Traducir reseña a Español
Keith white Mr
The motor sparked and the lathe is inoperative after q hour of use.
I wasted my money on this purchase. Vevor had poor customer service. Don't buy equipment from them
2 personas encontraron esto útil
Traducir reseña a Español
Fred Mr
Avoid.
The good:
* It runs.
* It's cheap.
The bad:
* The tools are too large for the tool post, you'll need to grind your own or get an aftermarket tool post.
* The motor screams like it's going to fail very very soon
* The tail stock quill was literally painted into the tailstock assembly, I had to break the paint to remove it and grind it clean
* It's nowhere near straight. There aren't enough adjustment screws to get it straight.
* You don't need a spring pass to get a clean cut, you need 20 passes because the tool deflection is so bad even with 0.025mm passes
* Backlash on the control wheels is ridiculous. 2 full turns of the cross slide wheel to take up the slack
* I can't apply enough pressure to get a knurling tool to cut BRASS because the cross slide flexes too much
2 personas encontraron esto útil
Traducir reseña a Español
David Smith Just dont
203x356 mm 650 W
I've had more downtime with this heavy paper weight then I've had of use. First the belt, then the cover over the chuck, now the lead screw broke when I was assembling after advised to disassemble to make sure everything was tight as the y axis would reverse when trying to feed with the micro y axis. I should have returned it when I had the chance. Save up and buy a reputable brand. Seems like others have had a better experience than I have. Glad for them, I regret buying this for sure.
4 personas encontraron esto útil
Traducir reseña a Español
DK You get what you pay for.
203x356 mm 650 W
Do not expect to use this lathe right out of the box. It requires extensive cleaning and adjustment before the first use. Shipping packaging is poor so expect to do shipping related repairs. tooling is all but useless.
With a few inexpensive changes in the design the lathe could have been much better. I can see that I will need to spent at least another $400 to make this lathe usable.
3 personas encontraron esto útil
Traducir reseña a Español
