Reseñas de clientes para VEVOR Torno de metal, mini torno 210x800, cambio de velocidad variable de 2500 RPM, mini torno de precisión de 850 W, torno para trabajar metales con motor sin escobillas, fresadora para varios tornea

This lathe is surprisingly capable, and the few things "wrong" with it respond well to a little cleaning, adjusting, tightening, etc. It's not really powerful, and although it turns aluminum and plastic without complaint, steel is a lot of work and aggressive cutting is not going to happen. Also, I don't make much use of the auto-feed; certainly not for thread-cutting, and only rarely for finish-quality feeding. The gears there are plastic, and I have not put them to the test in any way. Metal-gear kits are available, as are many other after-market mini-lathe accessories.

works fine for small projects needs adjusting and needs more power. I will eventually install a larger motor. Probably an ac motor with a variable frequency drive

Needs a lot of work to get the tailstock lined up. Also some work in adjusting the carriage. Some chatter with mild steel. If you just need something to turn mild or soft metals down, this is good. It's not a 5k Jet lathe. It pretty good for what it is.

The price of this lathe is fair, the value for money is there. Ideal for beginners like me. Very basic instruction book, with very few explanations, but there are many videos on YouTube on this particular product. Poorly adjusted when it leaves the factory, you have to check all the tightening points and attachments of the carriages and also the tightening of all the gears, especially the motor drive shaft which tends to loosen, bringing noise and vibration into the machine. Before starting to turn, familiarize yourself with all the controls. I opted to buy extra metal gears to replace the original ones. When buying turning tools, you should know that this lathe is made to receive 1/2 pieces. (not mentioned anywhere). Be very careful with forward and reverse use, because you will burn the fuse, as I did. (there is only one spare). Capable of turning small parts with enough precision, ideally soft metals like Aluminum, brass or copper. Lacks strength if you have to drill threads from 3/8 -1/4. If you have to do threads with a turning tool, you will have to be patient because you have to change gears in the box and nothing is explained anywhere except on the cover of the machine very briefly. In general, we have fun with this lathe, Ideal for learning the basics.

Does exactly what I,bought it for. I have a small shop and it fits in perfectly.. Could not have used a bigger lathe.

Great little machine for small projects, but wish I would’ve spent the extra and got the more horsepower motor

Small out of the box issue that was taken care of quickly by outstanding customer service department. Easy to use and great price.

Over-all, a good mini lathe for the price. I wanted the metal gears, but was surprised to see that they where mounted crooked... The tool carrier has a lot of play. So you must expect to put some work into it to make it fully functional. Not an out-the-box perfect tool.

Recibí el artículo y solo lo abrí para ver qué llegó bien, no lo he probado por falta de espacio en cuanto lo pruebe subiré un comentario.

I purchased the MX 8x14 lathe because of the size and higher powered motor over the 7" options. The lathe needs a good cleaning and the gibs all need adjusting. Do use way oil to lube all the ways and ball oilers. The included motor/spindle belt is terrible and will break with little use. I changed mine out for a 470mm 5mm pitch 9mm wide standard belt and changed yhe motor pulley to a 17T 5mm pitch pulley. The motor shaft is 10mm. It arrived on good shape without any damage to the lathe or packaging. It wad packaged well in a wooden crate.