Reseñas de clientes para VEVOR Torno de metal, mini torno 210x800, cambio de velocidad variable de 2500 RPM, mini torno de precisión de 850 W, torno para trabajar metales con motor sin escobillas, fresadora para varios tornea

Set up lathe and had a minor issue [ two loose screws ] and support were right onto it, I have used unit a bit now and find it fantastic so don't be afraid to purchase from Vevor

The lathe arrived within a few days of purchase and was undamaged. The crate it was shipped in is a work of art and worth keeping. I have spent ~24 hours disassembling, cleaning, inspecting, deburring, honing, oiling, greasing, and reassembling the lathe's mechanical subsystems - tail stock, compound slide, cross slide, carriage, apron, ways, feed screw, rack gear, chuck, and stud gears. I also inspected the motor and electronics. I have posted >150 photos in the Facebook group Home Shop Machinist (https://www.facebook.com/groups/1104020856281121) of my progress - 10/12 (6), 10/23 (19), 10/26 (46), 10/28 (17), 10/31 (35), 11/04 (26), 11/07 (5). This is the second lathe I have owned. I am very pleased with it so far. I am looking for more accessories - MT3 ER32 collet chuck w/collets, MT3 dead center, faceplate and lathe dogs, follower/steady rest, MT2 live center, tooling. I am also planning a few upgrades - way covers and locks and/or stops for the slides. Once I get it mounted to a solid base I will align the tailstock, tool, and chuck. Once aligned I will begin to make parts with it. I look forward to many years of service from it. It is a fine addition to my small home shop.

Yes I am pleased basically overall.The only thing I had to was to tighten the grub screw on the sadle wheel.The lathwe seems quite acruate. The only thing thing I do not like is not getting replies to my e-mails re I want to purchase a Tail stock Drill Chuck and the price for same. The only other thing is a Phone number in Australia so I can purchase accesseries and not given a www.----site I really want to talk to someone. Regards Alan Tomkins

Works good , fast shipping , good value for money. Over all I am happy with the product thank you vevor I’ll be buying from use again

I had my reservations about buying this lathe as the quality and accuracy was unknown but I was very pleasantly surprised. after a good tune up adjusting all the gibs and getting everything properly lubricated/aligned it has proven to be a real workhorse more than capable of making accurate parts. rigidity is fine, it will cut mild steel no worries but a spring pass is required but this is true of even much larger lathes. I have no issues recommending this lathe but be prepared to spend a bit of extra money on upgrading the tool holder and metal gears if you plan on doing a lot of thread cutting.

Before getting this lathe, I wathed video's from several youtubers reviewing/disassembling/repairing this (vevor) and other brands of 7x12 mini lathes. There seems to be several common issues - nothing show stopping - just sloppy toleranes, cost cutting, and poor QA. Although I have not taken the meters to the machine to test runout and flatness,I definately rest easier finding a lot of the issues had been resolved, at least in my model. Paint was much more even/not oversprayed, chuck had a back plate, tailstock has a cam lock, The dials are fairly tight out of the box - not much slop. The gibs I have checked have properly aligned holes. Forward/Reverse engage cleanly. Disenage is pretty clean. I can jiggle the lever up enough to get the gears to grind, but I have to force it. Machine seemed nicely oiled (not waxed or whatever gunk stuff is sometimes shipped with) )and is probably nopt going to need the deep cleaning I was expecting. The tailstock does suffer - it does not quite fit on the bed and is a bit slanted. But it looks like it is aligned fairly well and might just be a matter of horizontal adjustment to perfection. Meters will tell later on. Delivery was in a wooden crate. It is heavy. The UPS driver hates me. heh. But once removed trom the box the lathe is almost manageble by one person. BTW, just how do you open those wooden crates? this is the 3rd and I still have only about a 15% success rate straiting the connectors). Unbolting the lathe from the oontainer was tedious because I was worried of the lathe falling, and lifting it was iffy because I did not know where the best lift points (or the no lift points) were. Not looking forward to bringing it down to the basement where it will live. Included accessories are adquate but not awe inspiring. Such a cute little toolbox though - maybe (for the 30 cents the box must cost) a larger one, or two of them could be included with the lathe, because there is almost not enough room for it to be usable with even just the spare gears and teeth.

Very fast shipping , 7 x 14 lathe works perfectly very good bargain. so far very good equipment thank you

This lathe is a good buy for the money I did have to go over it and tweak it a bit and file some spots other than that it runs quiet and has great power..also the reason I bought it is because of the 1.5" spindle bore.. really enjoying this machine.

Lo he recibido en mi taller-casa y he quedado maravillado. Agradezco tan buena calidad y la prontitud para la entrega. Muchas gracias y los recomiendo ampliamente.

Nice little unit for hobbies. Options for cutting tools and end stock tools would have been nice but can purchase separately online.